Delete the ICMP name configuration

Hello,

This command is a three-state command and cannot be deleted using the undo command.

The three states are as follows:

1. Enable the function, that is, the icmp packets can be received.

2. Disable the function. That is, the icmp packets can't be received.

3. Whether an interface can receive the packet depends on the global configuration.

So to 'delete the command', you can run the icmp receive inherent-global command on the interface to restore the ICMP packet receiving configuration to the system configuration.

Refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100109721&id=EN-US_CLIREF_0172378879&lang=en

Any further questions, let us know.