decoder issue.

Hello, bro,

wish you can consider my solution.
I think your issue is that ESpacce IVS client display decoder exceeds the maximum decoder capability when pushed on the video wall using the decoder.
1. I think you need to check the settings first. because Decoder has it`s own capacity.
it can not support 1080P with 16 panels. try to change the resolution into 720P.
2. if still issues, please contact Huawei support.

Hello，bro! Hoping you are fine and wish you consider my answer:
For this issue, you need to check the decoder product document, check the capability this decoder can support, how many it can support and what is the resolution. If the resolution is higher, you can change it to lower, and then have a try.

Hello,Dear,

what is your modle of the Decoder?
Please Check the technical specifications and performance specifications of the decoder.
Or reduce the resolution of the camera for a test.

wish I can help you

bro:

Please refer to the parameter table of the decoder.

The default is to use the primary stream to push on  the video wall, but the primary stream defaults to 1080P, so it is recommended to modify the corresponding resolution and try again.

Hope this will help to you.

sir:
what's your device mode and current resolution setting
the default resolution is 1080p ,so we suggest you can set the resolution by yourself and test again

Hi, brother! Wish you can consider my solution
1. I think you need to check the settings first. because Decoder has it`s own capacity.
it can not support 1080P with 16 panels. try to change the resolution into 720P.
2. if still issues, please contact Huawei support.