Hello folks.
I need help with creating wan connection on ONT HG8245 via OLT terminal. I use next config at olt (below) but with this configuration I type user-vlan and other parameters at ont by myself. What I need to change at my configuration for skip this step? I need for ont receiving all automaticaly
dba-profile add profile-id 10 profile-name "test-speed" type3 assure 8000 max 99968
ont-srvprofile gpon profile-name "test"
ont-port pots 2 eth 4
multicast mode olt-control
commit
quit
ont-lineprofile gpon profile-name "test"
tcont 0 dba-profile-id 10
gem add 0 eth tcont 0
gem mapping 0 0 vlan 111
commit
quit
interface gpon 0/0
ont add 0 0 sn-auth 0000000000000000 omci ont-lineprofile-name "test" ont-srvprofile-name "test" desc "test"
quit
service-port 0 vlan 2222 gpon 0/0/0 ont 0 gemport 0 multi-service user-vlan 111