Hi there！
The procedure is as follows:
1. Open the Network Management app and choose from the main menu. Then expand Static Tunnel Configuration and click Batch Create Static Tunnel.
2. Set basic parameters, such as Network Type, Protocol Type, and Signaling Type.
3. Optional: Specify a link group in which links will participate in route calculating during configuration of static CR tunnels.
a. Click
… on the right of Specify Link Group. b. Select a link group in the Link Group dialog box.
c. Click OK.
You can create a link group in advance based on actual situations. Specifically, choose Resource > Inventory > Link Group Management from the main menu. Select Service link grouping in the Link View area. In the Link Group area, right-click in the blank area and choose to Create Link Group from the shortcut menu.
4. Configure the tunnel list and NE list. Double-click NEs in the physical topology to select the desired source and sink NEs.
You can also use either of the following methods to select source and sink NEs:
Method 1: Select the desired NE in the physical topology, right-click, and choose Add from the shortcut menu.
Method 2:
a. Click Add and choose NE. In the Select NE dialog box, select the desired NEs.
b.Click OK.
5. Click OK.
The system will check whether working and protection tunnels belong to the same risk link group before deploying configurations. If they belong to the same risk link group, a risk warning will be displayed. Configurations can be successfully deployed only after the risk warning has been confirmed. It is recommended that working and protection tunnels belong to different risk link groups, ensuring service continuity.
For more information, please click:
Creating Static Tunnels
Thank you!
