This section describes how to create a PV plant on FusionSolar. Before creating a plant, the customer/installer should first create an account. Once the account is created, the customer/installer will have own structure where will connect all the plants. Ask instruction about how to create an account on eu_inverter_support@huawei.com.
1. Login as installer on FusionSolar
Login on FusionSolar and from the main page choose “Add Plant”:
2. Fill the basic information
The Company name is your main structure that you create once you create the account.
After you fill all the details, select “Next”. All the details mark with red star are mandatory.
3. Connect the Equipment
Insert the inverter SN and select Next. If you have more than one inverter, select Add and insert the SN. If you can’t go further selecting “Next”, it means that the inverter is offline and you need to check the inverter connection with the router and management system.
Once you insert the SN of the inverter and the device type and the model will be recognized means that the inverter is online and you can go further.
4. Set the string configuration
Select string capacity configuration and set your capacity for each string. This helps in case that you will use the IV-Curve function.
5. Set the electricity price configuration
Set the On-grid Tariff and Purchasing Electricity Price and select “Next”
6. Other information settings
Insert a picture, fill the address and set the time zone.
7. Confirmation
8. Create an account for the customer
From the home page choose SettingsàUser ManagementàAdd
Fill the user detailsàchoose a role for the new user like “Residential plant user role”
Select the PV plant that you want to add the user and confirm with “OK”
