Network Diagram
Product : OSN 1800
OTU : CP6
CPRI Line Rates:
Service | Speed Rate (Mbps) |
CPRI1 | 614.4 |
CPRI2 | 1228.8 |
CPRI3 | 2457.6 |
CPRI4 | 3072 |
CPRI5 | 4915.2 |
CPRI6 | 6144 |
CPRI7 | 9830.4 |
Set CP6 board Working Mode : 1*AP6 general mode
This mode applicable for CPRI,2,3,4,5,7
Create the cross connection in “WDM Service Management
LEVEL: ANY
Service Type: CPRI 7 – Can select to another CPRI rate
Source slot: Select: CP6 slot number
Source Optical Port: Select client port
Source Optical Channel: select automatic by system
Sink slot: CP6 slot number
Sink Optical Port: select WDM port
Source Optical Channel: select automatic by system
Active Immediately: Active
View Port Cross connection as example below:
Apply step above to end site. And then create WDM trail like normal procudure.
CPRI 6 Configuration:
Set CP6 board Working Mode : 1*AP3 ODU2 mode
After set wavelength at sink & source create, logical fiber connection as usual then create WDM trail as example below:
Click apply.
Make sure before step above, board already connected logical & physically to MUX/DEMUX. Wavelength set as per planned.
