BH622 V2 CPUs


The server blade BH622 V2 supports Intel Xeon? new-generation high-performance CPUs: one or two Xeon? E5-2600 (Sandy Bridge-EP or Ivy Bridge-EP) series high-performance CPUs of 130 W or lower. For Intel Xeon?E5-2600 series high-performance CPUs, the maximum frequency is 3.3 GHz, and the maximum L3 cache is 20 MB.
Each CPU integrates a memory controller for supporting four DDR3 memory channels. Each channel supports three DDR3 DIMMs of 800, 1066, 1333, and 1600 MHz.
Each CPU integrates a PCIe controller with 40 lanes and supports PCIe 3.0.
The two CPUs are interconnected through two QuickPath buses at 8.0 GT/s.
For details about the CPUs supported by the BH622 V2, see the compatibility checker:

Other related questions:
E5 2600
Intel Xeon E5-2600 and E5-2600 v2 are Sandy Bridge CPUs provided by Intel for mainstream 2-socket servers. Huawei RH2288H V2 and RH1288 V2 servers support E5-2600 and E5-2600 v2 CPUs.

Default IP address, user name, and password of an E6000 blade
The iMana (BMC) default user name and password of an E6000 blade are as follows: Default user name: root Default password: Huawei12#$ The default password of iMana for some live network products of earlier versions may be root. The default IP address and subnet mask of the iMana (BMC) in slots 1 to 10 are as follows: Default IP address: to Default subnet mask: To log in to the BIOS of the E6000 blade, you may need to enter the default password uniBIOS123.

Differences between the RH2288 V2, RH2288H V2, and RH2288E
The four NICs of the RH2288 V2 are GE NICs on the mainboard while the NICs of the RH2288H V2 are flexible NICs. The number of PCIe slots on riser cards is also different. The RH2288E V2 supports holding guide rails for installation. For details, see their respective user guide.

Whether CPU model E5-2620 meets requirements when the GPU solution uses RH228 V2
In GPU-intensive scenarios, the performance of the E5-2620 (2.0 GHz, 6-core) is 10% to 20% lower than the E5-2680 (2.7 GHz, 8-core), so the E5-2620 is not recommended.

Differences among RH1288A V2, RH1288 V2, and RH1288 V3
The differences among the RH1288A V2, RH1288 V2, and RH1288 V3 are listed as follows. The servers' specifications are subject to the official website. ? The RH1288A V2 adopts the Huawei Hi1710 management chip (iBMC), and supports Intel? Xeon? E5-2600 v2 series processors, eight DIMM slots, and two LOM GE electrical ports. ? The RH1288 V2 adopts the management software iMana, and supports Intel? Xeon? E5-2600 and E5-2600 v2 series processors, 24 DIMM slots, and GE or 10GE LOM NIC modules. ? RH1288 V3 adopts the Huawei Hi1710 management chip (iBMC), and supports Intel? Xeon? E5-2600 v3 series processors, 16 DIMM slots, and GE or 10GE LOM NIC modules.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top