How many the external Ports are there on the rear panel

8

Name Type Quantity
VGA port DB-15 1
USB port USB 3.0 2
Management network port (Mgmt) Ethernet port 1
Serial port DB9 1
GE port/10GE electrical or optical port - -

Other related questions:
How many the external Ports are there on the front panel
Name Type Quantity Video graphics array (VGA) port DB-15 1 USB port USB2.0 2

What ports does the TE50 have?
The TE50 has the following ports: Video input ports: 1 x HD-VI/DVI 1 x HDMI/DVI (audio input supported by HDMI) 1 x VGA/YPbPr 1 x 3G-SDI 1 x CVBS Video output ports: 2 x HDMI/DVI (audio output supported by HDMI) 1 x VGA/YPbPr 1 x 3G-SDI 1 x CVBS Audio input ports: 1 x XLR 2 x RCA 1 x HDMI 1 x HD-AI (for microphone array) 1 x 3.5 mm Audio output ports: 4 x RCA 2 x HDMI USB ports: 2 x USB 2.0 Network ports: 2 x 10/100/1000 Mbit/s LAN 1 x Wi-Fi (built-in) 1 x PSTN Serial port: 2 x RS232 COM

How about the indicators on the RH1288 V3 rear panel
Indicator State Data transmission status indicator Blinking orange: Data is being transmitted. Off: No data is being transmitted. Connectivity status indicator Steady green: The port is properly connected. Off: The port is not in use. Unit Identification (UID) indicator The UID button/indicator helps identify and locate a server in a rack. You can turn on or off the UID indicator by manually pressing the UID button or remotely running a command on the iBMC CLI. Steady blue: The server is located. Off: The server is not located. You can hold down the UID button for 4 to 6 seconds to reset iBMC. Power supply unit (PSU) indicator Steady green: Both the active output and the standby output are normal. Off: There is no AC power input; the input overvoltage or undervoltage occurs and the PSU is not detected; the PSU is abnormal.

Interface numbering of cards on S series switches
The numbering rules for interfaces are as follows. Before the clustering function is enabled, interfaces on the switch are numbered in the format of slot ID/subcard ID/interface sequence number. After the clustering function is enabled, interfaces on the switch are numbered in the format of chassis ID/slot ID/subcard ID/interface sequence number. - Chassis ID: indicates the ID of a member switch in the CSS system, with the value of 1 or 2. - Slot ID: indicates the slot where a card is installed. - Subcard ID: indicates the ID of a subcard on the LPU. - Interface sequence number: indicates the number of each interface on the card. For example, if a card is installed in slot 3 of a switch, the fifth interface from left to right and top to bottom on the card is numbered 3/0/4. If the clustering function is enabled and the cluster ID is 1, the interface is numbered 1/3/0/4. Particularly, a 40GE interface can be split into four 10GE interfaces. Then, the numbering rules for interfaces are as follows: If the 40GE interface is numbered 40GE x/y/0/n, the four converted 10GE interfaces are numbered 10GE x/y/1/(4n+z). - x: indicates the chassis ID, that is, the cluster ID. The value exists only in a cluster. - y: indicates the slot number of a card. - n: indicates the sequence number of a 40GE interface, starting from 0. - z: indicates the interface location. The value is in the range from 0 to 3. For example, before the clustering function is enabled, a 40GE interface is numbered 40GE1/0/1. The four 10GE interfaces are numbered 10GE1/1/4, 10GE1/1/5, 10GE1/1/6, and 10GE1/1/7.

What ports does TE50 provide?
TE50 provides the following ports: Video input ports: 1 x HD-VI/DVI 1 x HDMI/DVI (HDMI supports audio input) 1 x VGA/YPbPr 1 x 3G-SDI 1 x CVBS Video output ports: 2 x HDMI/DVI (HDMI supports audio output) 1 x VGA/YPbPr 1 x 3G-SDI 1 x CVBS Audio input ports: 1 x XLR 2 x RCA 1 x HDMI 1 x microphone array HD-AI 1 x 3.5mm Audio output ports: 4 x RCA 2 x HDMI USB ports: 2 x USB 2.0 Network ports: 2 x 10/100/1000M LAN 1 x Wi-Fi (built-in) 1 x PSTN Serial ports: 2 x RS232 COM

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top