What's the measure to meet the electromagnetic compatibility requirements

6

To meet the previous requirements, take the following measures:

Locate the TR away from transformers, high-voltage wires, and high-current equipment, for example, at least 20 meters away from the AC transformer with the capacity greater than 10 kVA and at least 50 meters away from high-voltage wires.

Locate the TR away from high-power broadcasting transmitter, for example, at least 100 meters away from the broadcasting transmitter with the power greater than 1500 W.

If there is a mobile communication transmitter in the TR building, its interference effect must comply with local and national standards and regulations. If necessary, take measures to screen and isolate the interference.

Do not use portable wireless devices when you are near the server.

Other related questions:
What's the electromagnetic compatibility requirements for the proper running of the server
Electromagnetic Phenomenon Specifications Low frequency magnetic field Frequency (Hz) 50-20,000 Ampl. A/m (rms) 0.025-10 Amplitude modulation RF electric field Frequency (MHz) 0.009-18,000 Ampl. V/m (rms) < 3 Pulse modulation RF electric field Frequency (GHz) 1-18 Ampl. (V/m (peak)) < 3

What's the measure to meet ESD Protection Requirements
To meet ESD protection requirements, take the following measures: Popularize the importance of ESD prevention. Wear ESD shoes and ESD clothing before entering the TR. Use ESD tools such as ESD wrist straps, ESD tweezers, and extraction tools when operating on the server. Lay a raised floor in the TR. Ground all conducting materials in the TR, including computers, and set up ESD worktables. Keep non-ESD materials (such as common bags, foams, and rubbers) at least 30 centimeters away from ESD-sensitive components. Ground the server properly. Although laying the raised floor covered with semiconductive materials, use copper foil for grounding at a number of points on the floor (the copper foil should be placed between the concrete floor and the semiconductive floor and should be connected to a ground cable). Take dust prevention measures. Dust or other particles in the TR may cause poor connections between connectors or between metal connecting points. Maintain proper humidity. Too high humidity may make metal components rusty, while too low humidity may induce static electricity.

What are the measures taken in the TR to meet Mechanically Active Materials requirements
To meet these requirements, take the following measures in the TR: Use dustproof materials on the ground, wall, and ceiling of the TR. Install screens for outdoor doors and windows, and use dustproof materials for outer windows. Clean the TR, especially the air filters once every three months. Wear shoe covers and ESD clothing before entering the TR.

DeviceManager browser compatibility
The browsers supported by DeviceManager vary with operating systems. DeviceManager running on Windows 7 Professional for x86/x64 and Windows Server 2008 R2 Enterprise Edition SP1 for x64 supports the following browsers: Internet Explorer 9 to 11 Firefox 24 to 28 Chrome 27 to 35 DeviceManager running on Mac OS X 10.5 or later versions supports the following browsers: Safari 5.5 to 8.0

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top