Default user name and password of the NX220

3

The NX220 provides the following default accounts with the default password Huawei12#$:
? admin: The system administrator has permission to set and query device information.
? user: The common user has permission to query device information.
? factory: provided by Brocade and reserved for future use. The account is not available for end users.
? root
- Run universal Linux commands as user root to query binary files.
- Commands under user root are provided by Brocade and are used only for maintenance. These commands are not available for end users.
- Commands under user root are available for remote maintenance only when the network is reachable and you have the root user password.
- A reachable network indicates that the route configuration of the user network allows the Internet to directly access the IP address of the management network port on the NX220. The default IP address of the management network port is 10.77.77.77/24. The NX220 cannot be accessed for remote maintenance unless you have configured the accessible route for the network segment.

For more information about the user name and password of the NX220, see the NX220 user guide: http://support.huawei.com/enterprise/docinforeader.action?contentId=DOC1000006829&idPath=7919749|9856522|21782478|19955021|19961378

Other related questions:
What are the default user name and password of a WLAN device
For the default user name and password of console, Telnet, Bootrom, and web accounts, visit Wireless Access Controllers Troubleshooting, download the file, and find the List_of_Default_User_Names_and_Passwords_WLAN.xlsx file in the package.

Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

Default user name and password of the NX112
The default user name and password of the NX112 management network port are as follows: Default user name: root Default password: Huawei12#$

Default login user name and password of the USG9500 series
The default login user name and password of the USG9500 series are admin and Admin@123, respectively.

Default administrator account of the USG6000 series
The NGFW provides two default accounts: - System administrator account: admin/Admin@123. For the first time, you can use this account to log in to the USG6000 through the console port or web UI. - Auditor account: audit-admin/Admin@123. This account can be used to configure audit policies and view audit logs.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top