Default IP address of the NX220

17

The default IP address and subnet mask of the NX220 are as follows:
Default IP address: 10.77.77.77
Subnet mask: 255.255.255.0

Other related questions:
Default user name and password of the NX220
The NX220 provides the following default accounts with the default password Huawei12#$: ? admin: The system administrator has permission to set and query device information. ? user: The common user has permission to query device information. ? factory: provided by Brocade and reserved for future use. The account is not available for end users. ? root - Run universal Linux commands as user root to query binary files. - Commands under user root are provided by Brocade and are used only for maintenance. These commands are not available for end users. - Commands under user root are available for remote maintenance only when the network is reachable and you have the root user password. - A reachable network indicates that the route configuration of the user network allows the Internet to directly access the IP address of the management network port on the NX220. The default IP address of the management network port is 10.77.77.77/24. The NX220 cannot be accessed for remote maintenance unless you have configured the accessible route for the network segment. For more information about the user name and password of the NX220, see the NX220 user guide: http://support.huawei.com/enterprise/docinforeader.action?contentId=DOC1000006829&idPath=7919749|9856522|21782478|19955021|19961378

What is the default IP address of an NVR?
The default IP address of the Huawei embedded NVR is 192.0.0.64.

What is the default IP address after the TE10 is restored to its factory settings?
After the TE10 is restored to its default settings, its IP address is reset to 192.168.1.1.

What is the default IP address after the TE20 is restored to its factory settings?
After the TE20 is restored to its default settings, its IP address is reset to 192.168.1.1.

Default IP address, user name, and password of the MM910
The MM910 management network port (MGMT) is a standard GE port that supports 10/100/1000MBase-T auto-negotiation and UTP5 cables. The management network port is used to manage an E9000 chassis. The default floating IP address and subnet mask of the MM910 are as follows: IP address: 192.168.2.3 Subnet mask: 255.255.255.0 The default static IP address of the MM910 is as follows: 1MM: 192.168.2.1 2MM: 192.168.2.2 Subnet mask: 255.255.255.0 The default user name and password of the MM910 are as follows: Default user name: root Default password: Huawei12#$

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top