Default BMC IP address, user name, and password of a rack server

8

The default IP address and subnet mask of the BMC (iBMC or iMana) for rack servers are as follows:
Default IP address: 192.168.2.100
Default subnet mask: 255.255.255.0

The default user name and password of the BMC (iBMC/iMana) are as follows:
Default user name: root
Default password: Huawei12#$

The default password of iMana for some live network products of earlier versions may be root.

Other related questions:
Default IP address, user name, and password of the X8000 BMC
The X8000 server nodes do not have a default iMana (BMC) IP address. Therefore, it is recommended that the RMC be used to implement centralized management. When using an X8000 server node for the first time, query the iMana management port IP address of the node on the RMC. You can log in to the RMC command line interface using Telnet or SSH, and run the following command to query the iMana management network port IP address, DHCP/static mode, and gateway IP address: rmcget -l blade_id -t eth0 -d info In this command: id indicates the serial number of the server node. The value range is 01a to 40a and 01b to 40b. eth0 indicates the iMana management network port. The default iMana user name and password are as follows: Default user name: root Default password: Huawei12#$

Default IP address, user name, and password of the X6000 BMC
The default IP address, user name, and password of each X6000 server node are as follows: ? The iMana management network port IP addresses of half-width server nodes in slots 1 to 4 are 10.10.1.101 to 10.10.1.104. The subnet mask is 255.255.255.0. ? The iMana management network port IP addresses of full-width server nodes in slots 1 and 2 are 10.10.1.101 to 10.10.1.102. The subnet mask is 255.255.255.0. ? The user name and password for logging in to the iMana are root and Huawei12#$, respectively.

Default IP address, user name, and password of RH8100 V3 BMC
The default IP address and subnet mask of the RH8100 V3 HFC (iBMC) are as follows: ? The default IP address of the active HFC (HFC2) is 192.168.2.100. ? The default IP address of the standby HFC (HFC1) is 192.168.2.101. The management network port of the standby HFC (HFC1) is unavailable not matter in single-system or dual-system mode. You need to access the iBMC WebUI through the management network port of the active HFC (HFC2). The default user name and password of the iBMC are as follows: Default user name: root Default password: Huawei12#$

Default user name and password of the E9000 BMC
The iMana or iBMC of the E9000 blade is not configured with a default IP address. The default user name and password are as follows: Default user name: root Default password: Huawei12#$

Default user name and password of the CX317 BMC
The default user name and password of the BMC for CX116 and CX317 are as follows: Default user name: root Default password: Huawei12#$

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top