Whether an E9000 blade is configured with a default BMC IP address

27

An E9000 blade is not configured with a default BMC IP address. To log in to the management WebUI of a blade, you need to configure the BMC IP address for the blade first.
You can log in to the WebUI of the MM910 and configure the iBMC (iMana) IP address of a blade. For details, see Management Modules > MM910 Management Module User Guide > WebUI Overview (Software Version Is (U54)2.20 or Later) > Chassis Settings in the product documentation.
http://support.huawei.com/ehedex/hdx.do?docid=DOC1000053358&lang=en&idPath=7919749%7C9856522%7C21782478%7C19955022%7C19961380&clientWidth=1729&browseTime=1456665583989

Other related questions:
Default user name and password of the E9000 BMC
The iMana or iBMC of the E9000 blade is not configured with a default IP address. The default user name and password are as follows: Default user name: root Default password: Huawei12#$

Default IP address, user name, and password of an E6000 blade
The iMana (BMC) default user name and password of an E6000 blade are as follows: Default user name: root Default password: Huawei12#$ The default password of iMana for some live network products of earlier versions may be root. The default IP address and subnet mask of the iMana (BMC) in slots 1 to 10 are as follows: Default IP address: 10.10.1.101 to 10.10.1.110 Default subnet mask: 255.255.255.0 To log in to the BIOS of the E6000 blade, you may need to enter the default password uniBIOS123.

Default IP address, user name, and password of the X8000 BMC
The X8000 server nodes do not have a default iMana (BMC) IP address. Therefore, it is recommended that the RMC be used to implement centralized management. When using an X8000 server node for the first time, query the iMana management port IP address of the node on the RMC. You can log in to the RMC command line interface using Telnet or SSH, and run the following command to query the iMana management network port IP address, DHCP/static mode, and gateway IP address: rmcget -l blade_id -t eth0 -d info In this command: id indicates the serial number of the server node. The value range is 01a to 40a and 01b to 40b. eth0 indicates the iMana management network port. The default iMana user name and password are as follows: Default user name: root Default password: Huawei12#$

Default BMC IP address, user name, and password of a rack server
The default IP address and subnet mask of the BMC (iBMC or iMana) for rack servers are as follows: Default IP address: 192.168.2.100 Default subnet mask: 255.255.255.0 The default user name and password of the BMC (iBMC/iMana) are as follows: Default user name: root Default password: Huawei12#$ The default password of iMana for some live network products of earlier versions may be root.

Default user name and password of the CX11x
The default user name and password of the BMC and GE switching plane of the CX11x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top