RH5885 V3 Compatibility

6

Query the server compatibility on the Huawei Server Compatibility Checker: http://support.huawei.com/onlinetoolsweb/ftca/en

Other related questions:
Difference between the RH5885 V2, RH5885 V3, and RH5885H V3
Visit http://support.huawei.com/huaweiconnect/enterprise/thread-230857.html.

RH5885 V3 support for 32-bit OSs
The RH5885 V3 and RH5885H V3 support only 64-bit OSs.

Differences between the 4-socket RH5885 V2 and 8-socket RH5885 V2
An 8-socket RH5885 V2 server is made up of two 4-socket RH5885 V2 servers connected through four QPI cables. One of the 4-socket RH5885 V2 servers serves as the master node and the other as the slave node. Hardware differences: ? Rear I/O module: For the 4-socket server, the rear I/O module can be configured with two hard disks and the QPI cables cannot be connected. For the 8-socket server, the rear I/O module cannot be configured with two hard disks and the QPI cables are required. ? Hard disk quantity: 10 (4-socket server); 16 (8-socket server) ? CPU configuration: The 8-socket server must be configured with all CPUs and the 4-socket server can be configured with two or four CPUs. ? DIMM configuration: For the 4-socket server, DIMMs must be symmetrically installed on the memory risers. For the 8-socket server, apart from the symmetry requirements, the DIMMs must be installed on two nodes and the DIMM configuration must be the same on the two memory risers. ? RAID configuration: The 8-socket server requires only one RAID controller card, which must be installed on the master node. Software differences: ? The slave node of the 8-socket server has no BIOS. Therefore, no BIOS information is displayed on iMana. ? The power button on the front panel of the slave node of the 8-socket server is available, but there is no related power control page on the iMana WebUI. ? The iMana of the slave node of the 8-socket server does not provide black box, power-on strategy, system start strategy, and serial port switchover functions.

Whether the RH5885H V3 can be upgraded from 4-socket to 8-socket
The RH5885 V3 and RH5885H V3 cannot be upgraded from a 4-socket to an 8-socket configuration. You can purchase 8-socket RH8100 V3 servers and use them to substitute for RH5885 V3 and RH5885H V3 servers.

Version mapping of software on hosts for the OceanStor V3 series
Obtain the SystemReporter, UltraPath, CloudService, Toolkit, and eSDK versions compatible with the OceanStor V3 series from the version mapping of a specific version. Log in to http://support.huawei.com/enterprise and enter product model version mapping to find the specific mapping you are looking for.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top