SOL service of rack servers


The BMC of rack servers enables serial over LAN (SOL) through third-party tools (such as IPMItool) in Linux to allow remote access to the server serial port.
To use SOL, ensure that the BMC IPMI LAN(RMCP+) or IPMI LAN(RMCP) port is enabled (enabled by default).

Other related questions:
E9000 connection by using SOL
The E9000 server can connect to compute nodes and switch modules in the chassis by using the SOL function provided by the MM910, facilitating remote maintenance. For details, visit the following link:

Powering on a rack server
If the PSUs are installed properly in a rack server but not powered on yet, power on the PSUs. The server will power on with the PSUs. If the PSUs are powered on and the rack server is on standby, you can power on the server using any of the following methods: -Press the power button on the front panel of the server. -Log in to the iBMC CLI, and run the ipmcset -d powerstate -v 1 command. -Log in to the iBMC WebUI, choose Power > Power Control, and click the Power On button.

Rack server documents
Rack server documentation:|9856522|21782478|21782482|9901881&clientWidth=1520&browseTime=1493177342179 RH2265 V2, RH2265H V2, RH2268 V2, and RH2268H V2 are distribution products. To obtain documents of these servers, visit

Rack server
A rack server is a standard size server used for mounting inside a 19-inch rack-mount cabinet. Rack servers are most commonly available in 1 U (4.45 cm), 2 U, 4 U, 6 U, and 8 U sizes. Rack servers improve deployment density in limited space.

Rack server communication matrix
Visit to obtain the iBMC communication matrix for V3 servers.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top