Restoring BIOS password

30

Restore the Server BIOS password as follows:
On the iMana or iBMC CLI, run the maintenance -d upgradebios command to restore the BIOS default settings. Use this command with care because all the default BIOS settings are restored after the command is executed.
For details, see the iMana User Guide or iBMC User Guide.
Before running the maintenance -d upgradebios command, you need to apply for the BIN upgrade package, which may take time. If the BIOS password of a V2 server is lost, use Sandy Bridge (the first digit of the BIOS version is smaller than 3, for example, V060 or V160) and Ivy Bridge (the BIOS version is V3xx) cross-platform BIOS hpm package to restore the password.
If the BIOS password of the Sandy Bridge platform is lost, you can upgrade the platform to Ivy Bridge to restore the password. If this method is used, the BMC version must be 5.88 or later (supporting hpm upgrade package). If the BIOS is rolled back so as to obtain the BIOS password. After the BIOS password is obtained, upgrade the BIOS.

Other related questions:
BIOS password complexity
The server BIOS password must meet the following complexity requirements: ? Contain 8 to 16 characters ? Contain at least a space or one of the following special characters: `~!@#$%^&*()-_=+\|[{}];:'",<.>/? ? Contain at least two types of the following characters: ? Uppercase letters A to Z ? Lowercase letters a to z ? Digits 0 to 9 ? Cannot be duplicate with the last five passwords that were recently used.

BIOS initial password
The default password for logging in to BIOS is Huawei12#$ or uniBIOS123. Your account will be locked after three consecutive login failures with incorrect passwords, and you need to restart the server to unlock the account.

Setting server BIOS password
Set the BIOS password on the BIOS. For details, see "Common Tasks > Setting the BIOS Password" in the BIOS parameter reference. 1. The Romley Platform BIOS Parameter Reference applies to V2 servers. For details, see http://support.huawei.com/enterprise/en/doc/DOC1000018108?idPath=7919749|9856522|21782478|19955021|19961664. 2. The Brickland Platform BIOS Parameter Reference applies to 4- and 8-socket V3 servers. For details, see http://support.huawei.com/enterprise/en/doc/DOC1000039573?idPath=7919749|9856522|21782478|21782482|9768163. The Grantley platform BIOS Parameter Reference applies to 2-socket V3 servers. For details, see http://support.huawei.com/enterprise/en/doc/DOC1000053904?idPath=7919749|9856522|21782478|19955021|21584147.

Default IP address, user name, and password of an E6000 blade
The iMana (BMC) default user name and password of an E6000 blade are as follows: Default user name: root Default password: Huawei12#$ The default password of iMana for some live network products of earlier versions may be root. The default IP address and subnet mask of the iMana (BMC) in slots 1 to 10 are as follows: Default IP address: 10.10.1.101 to 10.10.1.110 Default subnet mask: 255.255.255.0 To log in to the BIOS of the E6000 blade, you may need to enter the default password uniBIOS123.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top