How to Change the CVM Management IP Address in FusionStorage

10

Change the CVM management IP address using vSphere Client.
Use PuTTY to log in to the CVM.
Ensure that the management IP address and user dsware are used to establish the connection.

Run the following command and enter the password of user root to switch to user root:
su - root

Run the following command to disable user logout upon system timeout:
TMOUT=0

Run the following command to restart the FusionStorage Agent (FSA) process:
service dswareAgent restart

Wait until the FSA process is restarted, and then go to the next step. The restart takes about three minutes.


Run the following command to check that the management IP address bound to the FSA process changes to the target IP address:
lsof | grep 10519

Other related questions:
Change the management IP address of the S1728GWR-4P switch
Change the management IP address of an S1728GWR-4P switch as follows: Choose System > IP. On the page displayed, configure the switch information such as the management VLAN and IP address. By default, the switch obtains an IP address through DHCP. If the switch fails to obtain an IP address through DHCP, the switch uses the IP address of 192.168.0.1. Perform the following operation to configure the switch to obtain an IP address through DHCP: 1. Choose System > IP. 2. Specify an available management VLAN for the switch and set IP地址方式 to DHCP. 3. Click Apply to save the configuration. 4. Click Restart DHCP to obtain a new IP address. Perform the following operations to configure a static IP address for the switch: 1. Choose System > IP. 2. Specify an available management VLAN for the switch, set IP Address Mode to Static, and enter an IP address, subnet mask, and gateway IP address. 3. Click Apply to save the configuration.

How to Manage Software Packages in FusionStorage
Upload software packages. On the FusionStorage web client, choose Hardware > Software Packages. The Software Packages page is displayed. Click Upload. A dialog box is displayed. Select software packages from a local directory and click Add. An installation package can be uploaded in zip or rpm format. The format of software packages that can be installed is rpm. No further action is required. Delete software packages. Perform either of the following operations to delete a single software package or software packages in batches: Batch deletion: Select multiple software packages, click Batch Delete in the upper part of the page, and click Confirm in the dialog box that is displayed. Single deletion: Locate the row that contains the target software package, click Delete, and click Yes in the dialog box that is displayed.

How to Manage CHAP Users in FusionStorage
On FusionStorage, choose Resource Pool > Volume Management > iSCSI Volume Mapping. The iSCSI Volume Mapping page is displayed. Choose CHAP Users in the right pane. Locate the row that contains the CHAP user whose password is to be reset, and click Change Password in the Operation column. The Change Password page is displayed. Enter the new password and confirm password, and click Modify. A warning box is displayed. Click OK. Query the CHAP user of an initiator. On FusionStorage, choose Resource Pool > Volume Management > iSCSI Volume Mapping. The iSCSI Volume Mapping page is displayed. Choose Initiators in the right pane. Locate the row that contains the initiator whose CHAP users are to be queried, click More in the Operation column, and select View Added CHAP Users. The View Added CHAP Users page is displayed, showing information about the queried CHAP user. No further action is required. Delete a CHAP user from an initiator. On FusionStorage, choose Resource Pool > Volume Management > iSCSI Volume Mapping. The iSCSI Volume Mapping page is displayed. Choose Initiators in the right pane. Locate the row that contains the initiator from which a CHAP user is to be deleted, click More in the Operation column, and select Delete Incoming CHAP. The Delete Incoming CHAP page is displayed. Select the CHAP user to be deleted and click OK. The Initiators page is displayed, and the CHAP user is successfully deleted. No further action is required.

Changing BMC IP address and password
You can query and modify the iMana (iBMC) IP address and password as follows: On the iMana WebUI: ? Choose Configuration->Network->Management Network Port, and query or modify the iMana IP address. ? Choose Configuration->User->Local User, and query or modify iMana users and passwords. On the iBMC web UI, you can query and modify the iBMC IP address, user name and password on the Configuration > Local Users and Configuration > Network pages. If you forget the BMC IP address or password, enter the BIOS interface and query or change the BMC IP address or the password of user root. ? For the Romley and Grantley platform, choose Advance > IPMI BMC Configuration > BMC Configuration on the BIOS interface. ? For the Brickland platform, choose Server Mgmt > BMC network configuration on the BIOS interface to modify the BMC IP address, and choose Server Mgmt > Reset BMC Root PassWord to change the password of user root.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top