How to Transfer a File Using WinSCP in FusionStorage

4

1. Open the WinSCP folder, and double-click WinSCP.exe.
2. Set the following login parameters:
? Host name: Enter the IP address of the destination device.
? Port number: Set it to the default value 22.
? User name: Enter the username.
? Password: Enter the password.
? Private key file: Retain the default setting, which is empty.
? Protocol: Select the default value SFTP, and click Allow SCP fallback.
3. Click Login.
The WinSCP file transfer window is displayed.
NOTE:
? If the key file is not selected during the first login, the system displays "Continue connecting and add host key to cache", asking you whether to continue the operation. Click Yes. The WinSCP file transfer window is displayed.
? By default, the C:\Documents and Settings\Administrator\My Documents directory of the local PC is displayed in the left pane, and the /root directory of the transfer destination device is displayed in the right pane.
4. Determine whether to copy a file from the local PC to the destination device.
? If yes, go to Step 5.
? If no, go to Step 9.
5. In the right pane, select a destination directory for storing the received file, such as /home.
6. In the left pane, select the directory in which the file to be transferred is saved, for example, E:\Software\configuration tool, and choose the file to be transferred.
7. On the menu bar, choose Files > Copy.
The Copy dialog box is displayed.
8. Confirm the file to be transferred and the destination directory for storing the file, and click Copy.
The file transfer from the local PC to the destination device starts.
9. In the left pane, select the directory in which the file to be transferred is saved, for example, E:\Software\configuration tool.
10. In the right pane, select a destination directory for storing the received file, for example, /home, and choose the file to be transferred.

Other related questions:
How Can I Use WinSCP to Transfer a File?
You can download WinSCP at http://support.huawei.com/carrier/idpRedirect?9F-54-DC-AD-D2-5F-44-13-C6-22-9F-92-05-B8-BD-9A-69-90-A0-A2-B4-10-12-30-F6-1C-A8-B6-65-BC-B5-BB-CE-86-33-25-7E-97-FE-A8-D7-A8-C9-EC-AB-1C-70-AB-5A-C6-26-A9-CA-7E-16-50-04-D2-85-E2-65-C7-21-EF-D9-F0-8C-C2-C9-DE-36-71-05-E5-60-1E-A1-FF-3E-E8-7C-8C-D6-32-64-5D-93-59-9F-1E-90-3C-39-40-82-28. 1.Open the WinSCP folder and double-click WinSCP.exe. The WinSCP Login dialog box is displayed. NOTE: You can click Languages to set the interface language. 2.Set login parameters in the login page. The parameters are described as follows: Hose name (H): indicates the IP address of the device that you want to connect to, for example, 192.168.34.32. Port number (R): The default value is 22. User name (U): indicates the user name for login, for example, admin123 Password (P): indicates the login password, for example, Admin123! Key file (K): The default value is blank. Keep the default value unchanged. Protocol: Keep the default value SFTP unchanged and select Allow SCP fallback (F). 3.In the left pane of the page, click Directories and enter values for Remote Directory (such as /home/permitdir) and Local Directory (such as E:\Software\Configuration tool). 4.Click Login. The WinSCP file transfer page is displayed. NOTE: If no key files are selected upon first login, a dialog box is displayed stating Continue connecting and add host key to cache. Click Yes (Y) to display the WinSCP file transfer page. 5.Select the file you want to transfer and choose File (F) > Copy (C). The Copy dialog box is displayed. 6.Confirm the file to be copied and the remote directory to which the file is to be copied and click Copy. The system starts to transfer the file from the local PC to the remote device.

How to Use WinSCP to Log In to a Node in Key Pair Authentication Mode in FusionStorage
1. Check whether WinSCP on the local PC has been used to log in to a node in key pair authentication mode. ? If yes, go to Step 4. ? If no or you cannot confirm, go to Step 2. 2. Run WinSCP and specify the following information about the target node: ? IP address and the SSH port number (default value: 22). ? Username for the SSH login. For example, the username for logging in to a FusionSphere OpenStack node is fsp. ? Private key certificate. Select the prepared local private key certificate file. The file name extension of the private key certificate is *.ppk. 3. To facilitate subsequent access, click Save and set the session name in the displayed dialog box. After this step, go to Step 5. 4. In the navigation tree in the left pane, choose Session > Stored sessions and select the saved session. 5. Click Login. If the in-use private key certificate is an encrypted certificate, the Key passphrase window is displayed when a session is setup. In this case, enter the certificate password.

Which types of interfaces can be used for FTP file transfer on S series switches
For S series switches (except S1700 switches), FTP file transfer can be performed between a client and a server when the following conditions are met: 1. The FTP client software has been installed on the client. 2. The client and server can successfully ping each other. When the preceding conditions are met, FTP file transfer can be performed between interfaces of any type, such as Eth-Trunk interfaces and management interfaces.

How to Set the Maximum Number of Backup files in FusionStorage
Use PuTTY to log in to the FSM node. Ensure that the FSM floating IP address and username dsware are used to establish the connection. Run the following command and enter the password of user root to switch to user root: su - root Run the following command to disable logout on timeout: TMOUT=0 Run the following command to switch to the directory containing the backup configuration file: cd /opt/dsware/manager/webapps/dsware/WEB-INF Run the following command to open the backup configuration file using the visual interface (vi) editor: vi BackupConf.properties Press i to enter editing mode. Change the value of the following parameter: maxBackupCount: specifies the maximum number of FusionStorage backup files that can be stored. Press Esc, enter :wq, and press Enter. The system saves the configuration and exits the vi editor. Run the following command to display the content in the backup configuration file: cat BackupConf.properties Check whether the maxBackupCount parameter is set correctly. If yes, no further action is required. If no, go to Step 11. Perform Step 5 to Step 9 to change the maximum number of backup files if the original setting is inappropriate. NOTE: If the value setting fails again, contact technical support.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top