How to Configure an SNMP Station in FusionStorage

10

1. On the FusionStorage web client, choose System > System Configuration > SNMP Station.
The SNMP Station page is displayed.
2. Enter the SNMP station name and select an SNMP version.
SNMPv2c and SNMPv3 are supported. However, SNMPv3 is recommended because SNMPv2c provides low security.
3. Enter the IP address and port number of the SNMP station.
Ensure that the port number is the same as that used by the third-party system.
4. After the configuration is complete, click Save.
The SNMP station is configured.

Other related questions:
How to Configure an Initiator in FusionStorage
1. On FusionStorage, choose Resource Pool > Volume Management > iSCSI Volume Mapping. The iSCSI Volume Mapping page is displayed. 2. Choose Initiators in the right pane. 3. Click Create. 4. Check whether an initiator has been configured for an application server. ? If yes, go to Step 5. ? If no, go to Step 6. 5. On the Scan for initiators page that is displayed by default, select an initiator and click Add Initiators. The Initiators page is displayed. You can view information about the added initiator in the initiator list. No further action is required. 6. Select Add initiator. 7. Set Initiator Name and click Create Initiator. The initiator name configured in the application server system must be the same as the name of the initiator created in FusionStorage. The Initiators page is displayed. You can view information about the created initiator in the initiator list.

How to Configure Password Policies in FusionStorage
On FusionStorage, choose System > Users and security > Password Policy. The Password Policy page is displayed. Set the following parameters to configure password policies: Minimum Number of Characters Maximum Number of Characters Specail Characters Required Allows Username or Reverse Username Number of Repetitions Password Validity Period (days) Change Password upon Reset or First Login Password Change Interval Advance Warning Before Password Expires (days) Repetition Not Allowed Within (days) Allowed Incorrect Inputs Period (min) User Lock Period (min) Click Save. A dialog box is displayed indicating that the password policies are configured. Click OK. The password policies are successfully configured.

How to Power Off FusionStorage.
Stop the FusionStorage service. Use PuTTY to log in to the active FSM node. Ensure that the management IP address and user dsware are used to establish the connection. Run the following command to disable user logout upon system timeout: TMOUT=0 Run the following command to stop the FusionStorage service: /opt/dsware/client/bin/dswareTool.sh --op stopDSwareService Information similar to the following is displayed: This operation is high risk,please input y to continue: Enter y as prompted. Enter username cmdadmin and its password as prompted. The default password of user cmdadmin is cmdHuawei@123. The service is successfully stopped if information similar to the following is displayed: Operation finish successfully. Result Code:0 [Tue May 10 16:16:36 CST 2016] DswareTool operation end. Power off the virtualization environment or servers. If FusionStorage is deployed in converged mode, power off the virtualization environment by following operations in the corresponding software documentation. If FusionStorage is deployed in separated mode, power off servers by following operations in the corresponding server documentation.

How to Power On FusionStorage.
Start the FusionStorage service. Use PuTTY to log in to the active FSM node. Ensure that the management IP address and user dsware are used to establish the connection. Run the following command to disable user logout upon system timeout: TMOUT=0 Run the following command to start the FusionStorage service: /opt/dsware/client/bin/dswareTool.sh --op restartDSwareService Information similar to the following is displayed: This operation is high risk,please input y to continue: Enter y as prompted. Enter username cmdadmin and its password as prompted. The default password of user cmdadmin is cmdHuawei@123. The service is successfully started if information similar to the following is displayed: Operation finish successfully. Result Code:0 [Tue May 10 16:17:23 CST 2016] DswareTool operation end. Start upper-layer services. After FusionStorage is successfully started, start upper-layer services by following operations in the related documents.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top