How to Query Performance Statistics in FusionStorage

24

On FusionStorage, choose Monitoring > Performance > Performance Statistics.
The Performance Statistics page is displayed.
Configure the following parameters:
Monitoring Period
Object Type: specifies the alarm object type, which can be Server, Disk, Storage Pool and Volumes.
Performance Indicator:
Server: CPU usage, Memory usage.
Disk: IOPS, Read IOPS, Write IOPS, Bandwidth, Read bandwidth, Write bandwidth, Latency, Disk Usage.
Storage Pool: IOPS, Read IOPS, Write IOPS, Bandwidth, Read bandwidth, Write bandwidth, Latency, Storage pool usage.
Volumes: IOPS, Read IOPS, Write IOPS, Bandwidth, Read bandwidth, Write bandwidth, Latency, Average block size, Average queue depth.
IOPS is the sum of Read IOPS and Write IOPS.
Bandwidth is the sum of Read bandwidth and Write bandwidth.
Object: specifies the object.
A server is identified by its IP address.
A disk is identified by the host IP address, slot number, and equipment serial number (ESN).
A storage pool or a volume is identified by its name.
Click Query.
The query result is displayed.

Other related questions:
How to query Initiators on a host in FusionStorage
On FusionStorage, choose Resource Pool > Volume Management > iSCSI Volume Mapping. The iSCSI Volume Mapping page is displayed. Choose Hosts in the right pane. Locate the row that contains the host where initiators are to be queried, click More in the Operation column, and select View Host-Mapped Initiator. The View Host-Mapped Initiator page is displayed, showing information about the queried initiators. No further action is required.

How to Query Task Execution Status in FusionStorage
On the FusionStorage web client, choose System > Tasks and Logs > Task Center. The Task Center page is displayed. Query the status of the tasks that are in progress or complete in the system. The system supports multiple search criteria, including time range and keywords.

Traffic statistics configuration on the USG2000&5000 series
You can configure traffic statistics on the CLI of the USG2000&5000 series: 1. Configure an ACL to define packets to be debugged. 2. Run the firewall statistic acl 3333 enable command in the diagnose view. [USG-diagnose] firewall statistic acl 3333 enable 3. Run the display firewall statistic acl command in the diagnose view. [USG-diagnose] display firewall statistic acl 14:33:26 2010/03/27 Current Show sessions count: 1 Protocol(ICMP) SourceIp(172.16.1.156) DestinationIp(172.16.1.25) SourcePort(1) DestinationPort(2048) VpnIndex(public) Receive Forward Discard Obverse : 4 pkt(s) 4 pkt(s) 0 pkt(s) Reverse : 4 pkt(s) 4 pkt(s) 0 pkt(s) Discard detail information: Check whether the firewall receives packets, forwards the packets, and receives return packets. If some packets are dropped, determine the packet loss location. View packet discard possible causes to identify the cause. 4. After debugging is complete, disable traffic statistics as soon as possible because long-term traffic statistics affect firewall performance. 5. Run the undo firewall statistic command to disable traffic statistics. 6. Run the reset firewall statistic acl all command to clear statistics. 7. If necessary, run the undo acl xxxx command to delete the configured ACL.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top