AR router troubleshooting guide: An AR router cannot access the Internet through PPPoE dial-up connections

26

For the problem that an AR router cannot access the Internet through PPPoE dial-up connections, see the troubleshooting guide. For details, access the URL in the right column.

Other related questions:
An AR router cannot access the Internet
1. Confirm whether the line provided by the vendor works properly. 2. Check the following configurations of the AR router: - Whether NAT is configured. - Whether valid routes are configured. - Whether DNS address resolution is configured. - Whether Internet access control is performed.

Configure VRRP on an AR router and connect the router to a firewall for external network access
The roadmap of configuring VRRP on an AR router and connecting the router to a firewall for external network access is as follows: 1. Configure VRRP on an AR router to implement two-node backup, and configure a virtual IP address. 2. Add the Layer 2 interface of a firewall on the intranet side to the same VLAN, and configure a VLANIF address. 3. Add the physical interface and VLANIF interface of the firewall to a security zone, and configure an inter-zone policy. 4. Configure the next hop for the route from the firewall to the intranet as a VRRP virtual IP address so that a normal link can be switched over to if an active link is interrupted. For details about the configuration, see the URL: Example for Connecting the AR to the Firewall Through VRRP.

How to control Internet access on an AR router
The AR router provides the URL filter function, which enables the AR router to control URLs and forbid/allow users to access specific web page resources so as to regulate Internet access behavior. For details about the configuration procedure, choose Configuration Guide (via Command Line)> Security> Deep Security Defense Configuration> URL Filtering Configuration through the URL: Product documentation.

A DSP module does not work properly
The problem may be caused by the following reasons: 1. The DSP DIMM module is not installed or not properly installed. 2. An audio license file is not installed on the system. For details, see the following URL: DSP无法正常工作

Whether the AR router PPPoE dial-up lines bandwidth can be superimposed?
AR router PPPoE dial-up line bandwidth can not be superimposed, can not be achieved result like: 10M+10M=20M.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top