FusionManager V1R5C00 troubleshooting

0

refer to the link(Cloud Data Center):
http://support.huawei.com/enterprise/en/doc/DOC1000070031?idPath=7919749%7C7919788%7C9856606%7C21462752%7C8576916
refer to the link(Server Consolidation,top-local):
http://support.huawei.com/enterprise/en/doc/DOC1000070033?idPath=7919749%7C7919788%7C9856606%7C21462752%7C8576916
refer to the link(Server Consolidation,all-in-one):
http://support.huawei.com/enterprise/en/doc/DOC1000070032?idPath=7919749%7C7919788%7C9856606%7C21462752%7C8576916

Other related questions:
In FusionManager V100R005,how to troubleshoot the alarm "ALM-ServiceCenter.9203 ServiceCenter Server Time Changed"
Click System. The System page is displayed. Choose System Configuration > Time Management. The Time Management page is displayed. On the Time Management page, click Synchronize Time Forcibly. System services will be restarted during forcibly time synchronization, which takes about 20 minutes. Log in to ServiceCenter again after about 20 minutes, and go to the Time Management page to check whether the forcibly time synchronization is successful. If yes, go to Step 5. If no, go to Step 7. Check whether the alarm is cleared. If yes, no further action is required. If no, go to Step 6. Handle the time error by following instructions provided in System Time Errors in Troubleshooting in the product documentation. Contact technical support.

In FusionManager V100R005,how to troubleshoot the alarm "ALM-ServiceCenter.9202 NTP Service Startup Failure"
Use PuTTY to log in to the ServiceCenter as user galaxmanager. Ensure that the management IP address of the ServiceCenter is used to establish the connection. Run the following command to disable PuTTY logout on timeout: TMOUT=0 Run the following command to check the process status: ntp status. The process is normal if the following information is displayed: remote refid st t when poll reach delay offset jitter ================================================================================ *LOCAL(0) .LOCL. 5 1 1 64 377 0.000 0.000 0.001 Checking for network time protocol daemon (NTPD): running Check whether the process is running properly. If yes, go to Step 11. If no, go to Step 5. Run the ntp restart command. Run the following command to check the process status: ntp status. The process is normal if the following information is displayed: remote refid st t when poll reach delay offset jitter ================================================================================ *LOCAL(0) .LOCL. 5 1 1 64 377 0.000 0.000 0.001 Checking for network time protocol daemon (NTPD): running Check whether the process is running properly. If yes, go to Step 8. If no, go to Step 9. Two or three minutes later, check whether the alarm is cleared. If yes, no further action is required. If no, go to Step 11 Run command ps -efww | grep -v grep | grep ntpd check the process ID. Run command kill -9 processID, check whether the result is successful? If yes, go to Step 5 If no, go toStep 11 Contact technical support.

In FusionManager V100R005,how to troubleshoot the alarm "ALM-ServiceCenter.9207 License Is About to Expire"
Click System. The System page is displayed. Click License Management. The License Management page is displayed. Make a note of the equipment serial number (ESN) displayed. Obtain the contract number. Contact technical support engineers to apply for the new license. On the License Management page, click in the displayed window to select the new license file. Click Open. Click Upload to load the license file. The information about the loaded license file is displayed on the License Management page, indicating that the license file has been loaded successfully. Check whether the license file has been loaded successfully. If yes, go to Step 10. If no, go to Step 11. Click Monitoring.Go to Alarm List to check whether the alarm is cleared. If yes, no further action is required. If no, go to Step 11. Contact technical support.

In FusionManager V100R005,how to troubleshoot the alarm "ALM-ServiceCenter.9208 License Has Expired"
Click System. The System page is displayed. Click License Management. The License Management page is displayed. Make a note of the equipment serial number (ESN) displayed. Contact technical support engineers to apply for the new license. On the License Management page, click in the displayed window to select the new license file. Click Open. Click Upload to load the license file. The information about the loaded license file is displayed on the License Management page, indicating that the license file has been loaded successfully. Check whether the license file has been loaded successfully. If yes, go to Step 9. If no, go to Step 10. Click Monitoring.Go to Alarm List to check whether the alarm is cleared. If yes, no further action is required. If no, go to Step 10. Contact technical support.

In FusionManager V100R005,how to troubleshoot the alarm "ALM-ServiceCenter.9002 Communication Between the ServiceCenter and SNMP Management Station Interrupted"
Click Monitoring. The Alarm List page is displayed. Locate the row that contains the alarm, and click, in the displayed window to obtain the name and IP address of the SNMP management station. Click System. The SNMP Management Station page is displayed. On the SNMP Management Station page, configure a correct IP address for the SNMP management station and click Save. After about 2 minutes, check whether the alarm is cleared. If yes, no further action is required. If no, go to Step 6. Contact technical support.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top