In FusionManager V100R005,what's the mean of the alarm "ALM-ServiceCenter.9202 NTP Service Startup Failure"

2

The time management module detects the running status of the Network Time Protocol (NTP) service. If the service stops, the system will attempt to restart the service. This alarm is generated when the system fails to restart the NTP service for three consecutive times.

This alarm is automatically cleared when the time management module detects that the NTP service becomes normal.

Other related questions:
In FusionManager V100R005,what's the mean of the alarm "ALM-ServiceCenter.9202 NTP Service Startup Failure"
The time management module detects the running status of the Network Time Protocol (NTP) service. If the service stops, the system will attempt to restart the service. This alarm is generated when the system fails to restart the NTP service for three consecutive times. This alarm is automatically cleared when the time management module detects that the NTP service becomes normal.

In FusionManager V100R005,what's the impact of the alarm"ALM-ServiceCenter.9202 NTP Service Startup Failure"
The system cannot synchronize time with the upper-layer time server. As a result, the time displayed on the system is inaccurate

In FusionManager V100R005,how to troubleshoot the alarm "ALM-ServiceCenter.9202 NTP Service Startup Failure"
Use PuTTY to log in to the ServiceCenter as user galaxmanager. Ensure that the management IP address of the ServiceCenter is used to establish the connection. Run the following command to disable PuTTY logout on timeout: TMOUT=0 Run the following command to check the process status: ntp status. The process is normal if the following information is displayed: remote refid st t when poll reach delay offset jitter ================================================================================ *LOCAL(0) .LOCL. 5 1 1 64 377 0.000 0.000 0.001 Checking for network time protocol daemon (NTPD): running Check whether the process is running properly. If yes, go to Step 11. If no, go to Step 5. Run the ntp restart command. Run the following command to check the process status: ntp status. The process is normal if the following information is displayed: remote refid st t when poll reach delay offset jitter ================================================================================ *LOCAL(0) .LOCL. 5 1 1 64 377 0.000 0.000 0.001 Checking for network time protocol daemon (NTPD): running Check whether the process is running properly. If yes, go to Step 8. If no, go to Step 9. Two or three minutes later, check whether the alarm is cleared. If yes, no further action is required. If no, go to Step 11 Run command ps -efww | grep -v grep | grep ntpd check the process ID. Run command kill -9 processID, check whether the result is successful? If yes, go to Step 5 If no, go toStep 11 Contact technical support.

In FusionManager V100R005,what's the possible reason of the alram "ALM-ServiceCenter.9202 NTP Service Startup Failure"
The clock synchronization process stops. The clock synchronization process is faulty.

In FusionManager V100R005,what's the mean of the alarm "ALM-ServiceCenter.9208 License Has Expired"
The alarm module monitors the license status every 24 hours. This alarm is generated when the alarm module detects that the license has expired. This alarm is cleared when a new license is loaded to the server and the validity period is longer than 30 days.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top