how to deal with Statistical Analysis Process Is Abnormal alarm on FusionCompute V1R5C00 version

1

This alarm is generated when the system detects that the statistical analysis process has stopped or is abnormal.

This alarm is cleared when the statistical analysis process becomes normal.
Identify the IP address of the node for which the alarm is generated.

On the FusionCompute portal, click Monitoring, and choose Alarm in the navigation tree on the left. On the Alarm page, locate the row that contains the alarm and click the name in the Alarm Object column.
The Service and Management Node page is displayed.

On the Service and Management Node page, view information about the management nodes and obtain the IP address of the node whose name is the same as that of Alarm Object in Step 1.
Restart the statistical analysis process.

Use PuTTY to log in to the node.
Ensure that the management IP address and username gandalf are used to establish the connection.

Run the following command and enter the password of user root to switch to user root:

su - root


Run the following command to restart the process:

service analyzerd restart

NOTE:
Restarting the process may cause temporary interruption of the statistical analysis service.


Run the following command to check the process status:
service analyzerd status

Check whether the command output is as follows:

Checking for analyzerd: running

If yes, go to Step 8.
If no, go to Step 9.

After 3 or 4 minutes, switch to the Alarm page and check whether the alarm is cleared.

Other related questions:
how to deal with Real-Time Analysis Process Is Abnormal alarm on FusionCompute V1R5C00 version
This alarm is generated when the system detects that the real-time analysis process has stopped or is abnormal. This alarm is cleared when the real-time analysis process becomes normal. Identify the management IP address of the VRM node. On the FusionCompute portal, click Monitoring, and choose Alarm in the navigation tree on the left. On the Alarm page, locate the row that contains the alarm and click the name in the Alarm Object column. The Service and Management Node page is displayed. On the Service and Management Node page, view information about the management nodes and obtain the IP address of the node whose name is the same as that of Alarm Object in Step 1. Restart the real-time analysis process. Use PuTTY to log in to the node. Ensure that the management IP address and username gandalf are used to establish the connection. Run the following command and enter the password of user root to switch to user root: su - root Run the following command to restart the process: service cepd restart NOTE: Restarting the process may cause temporary interruption of the real-time analysis service. Run the following command to check the process status: service cepd status Check whether the command output is as follows: Checking for cepd: running If yes, go to Step 8. If no, go to Step 9. After 3 or 4 minutes, switch to the Alarm page and check whether the alarm is cleared.

how to deal with PMCD Process Is Abnormal alarm on FusionCompute V1R5C00 version
This alarm is generated when the system detects that the monitoring processing process pmcd has stopped or is faulty. This alarm is cleared when the pmcd process becomes normal. Identify the management IP address of the node for which the alarm is generated. On the FusionCompute portal, click Monitoring, and choose Alarm in the navigation tree on the left. On the Alarm page, locate the row that contains the alarm and click the name in the Alarm Object column. The Service and Management Node page is displayed. On the Service and Management Node page, view information about the management nodes and obtain the IP address of the node whose name is the same as that of Alarm Object in Step 1. Restart the process of the performance management center. Use PuTTY to log in to the node. Ensure that the management IP address and username gandalf are used to establish the connection. Run the following command and enter the password of user root to switch to user root: su - root Run the following command to restart the process: service pmcd restart NOTE: Restarting the process may cause temporary interruption of monitoring processing service. Run the following command to check the process status: service pmcd status Check whether the command output is as follows: Checking for pmcd: running If yes, go to Step 8. If no, go to Step 9. After 3 or 4 minutes, switch to the Alarm page and check whether the alarm is cleared.

how to deal with NOTIFY Process Is Abnormal alarm on FusionCompute V1R5C00 version
This alarm is generated when the system detects that the subscription notification process has stopped or is abnormal. This alarm is cleared when the subscription notification process becomes normal. Identify the management IP address of the Virtualization Resource Management (VRM) node. On the FusionCompute portal, click Monitoring, and choose Alarm in the navigation tree on the left. On the Alarm page, locate the row that contains the alarm and click the name in the Alarm Object column. The Service and Management Node page is displayed. On the Service and Management Node page, view information about the management nodes and obtain the IP address of the node whose name is the same as that of Alarm Object in Step 1. Restart the subscription notification process. Use PuTTY to log in to the node. Ensure that the management IP address and username gandalf are used to establish the connection. Run the following command and enter the password of user root to switch to user root: su - root Run the following command to restart the process: service notifyd restart NOTE: Restarting the process may cause temporary interruption of the subscription notification service. Run the following command to check the process status: service notifyd status Check whether the command output is as follows: Checking for notifyd: running If yes, go to Step 8. If no, go to Step 9. After 3 or 4 minutes, switch to the Alarm page and check whether the alarm is cleared.

how to deal with VNC Agent Process Is Abnormal alarm on FusionCompute V1R5C00 version
This alarm is generated when the system detects that the VNC agent process vncd has stopped or is faulty. This alarm is cleared when the vncd process becomes normal. Identify the management IP address of the node for which the alarm is generated. On the FusionCompute portal, click Monitoring, and choose Alarm in the navigation tree on the left. On the Alarm page, locate the row that contains the alarm and click the name in the Alarm Object column. The Service and Management Node page is displayed. On the Service and Management Node page, view information about the management nodes and obtain the IP address of the node whose name is the same as that of Alarm Object in Step 1. Restart the process of the performance management center. Use PuTTY to log in to the node for which the alarm is generated. Ensure that the management IP address and username gandalf are used to establish the connection. Run the following command and enter the password of user root to switch to user root: su - root Run the following command to restart the process: service vncd restart NOTE: Restarting the process may cause temporary interruption of VNC agent processing service. Run the following command to check the process status: service vncd status Check whether the command output is as follows: Checking for vncd: running If yes, go to Step 8. If no, go to Step 9. After 3 or 4 minutes, switch to the Alarm page and check whether the alarm is cleared

how to deal with HA Agent Process Is Abnormal alarm on FusionCompute V1R5C00 version
This alarm is generated when the system detects that the HA agent process uvphad has stopped or is faulty. This alarm is cleared when the uvphad process becomes normal. Identify the management IP address of the node for which the alarm is generated. On the FusionCompute portal, click Monitoring, and choose Alarm in the navigation tree on the left. On the Alarm page, locate the row that contains the alarm and click the name in the Alarm Object column. The Service and Management Node page is displayed. On the Service and Management Node page, view information about the management nodes and obtain the IP address of the node whose name is the same as that of Alarm Object in Step 1. Restart the process of the performance management center. Use PuTTY to log in to the node for which the alarm is generated. Ensure that the management IP address and username gandalf are used to establish the connection. Run the following command and enter the password of user root to switch to user root: su - root Run the following command to restart the process: service uvphad restart Run the following command to check the process status: service uvphad status Check whether the command output is as follows: Checking for uvphad running If yes, go to Step 8. If no, go to Step 9. After 3 or 4 minutes, switch to the Alarm page and check whether the alarm is cleared.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top