In FusionInsight,what time does Alarm 12007 Process Fault occur?

9

This alarm is generated when the process health check module detects that the process connection status is Bad for three consecutive times. The process health check module checks the process status every 5 seconds.

This alarm is cleared when the process can be connected.

Other related questions:
In FusionInsight,What time does ALM-12033 Slow Disk Fault
The system runs the iostat command every second to monitor the disk I/O indicator. If there are more than 30 times that the svctm value is greater than 100 ms in 60s, the disk is faulty and the alarm is generated.

In FusionInsight,What time does Alarm 12014 Partition Lost occur
This alarm is generated when the system detects that a partition to which service directories are mounted is lost (because the device is removed or goes offline, or the partition is deleted). The system checks the partition status periodically. This alarm must be manually cleared.

In FusionInsight,What is the cause for Alarm 12006 Node Fault
Possible cause are ?The network is disconnected, or the hardware is faulty. ?The time on the NodeAgent node is slow. The fault will be rectified only after the system time is normal

In FusionInsight,What time does Alarm 12012 NTP Service Abnormal occur
This alarm is generated when the NTP service fails to synchronize time with an upper-layer NTP server. This alarm is cleared when the NTP service synchronizes time properly with the upper-layer NTP server.

In FusionInsight,What is the possible cause for Alarm 12006 Node Fault
The disk space is insufficient.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top