How Many Private Images Can Be Created Using One Account?


In this version, you can create a maximum of 100 private images per account per region.

Other related questions:
Can Specifications of ECSs Created Using a Private Image Differ from Those of ECSs Used to Create the Image?

You can modify hardware specifications as required when using a private image to create an ECS.

How Long Does It Take to Create a Private Image Using an ECS?

It takes about 20 minutes to create a private image using an ECS.

Should I Stop the ECS Before Creating a Private Image Using that ECS?

You must stop the ECS when creating a private image using that ECS. If the ECS is running, the ECS memory may buffer data to be read, which may result in data loss in the created image. To prevent this issue, stop the ECS before creating an image.

Can Multiple Trackers Be Created for One Tenant?

Currently, only one tracker can be created for each tenant.

What Are the Impacts If the ECS That Has Not Been Configured Is Used to Create the Private Image?

If the IP address assignment mode of the ECS NIC is not set to DHCP or the network udev rules are not deleted, the ECS created using the registered private image may fail to obtain the correct network configuration, or the ECS NIC is not started from eth0. Then, you must log in remotely to the ECS and configure it.

If you do not configure the image used for creating the ECS running Linux before the creation, the following conditions may occur:

  • Customized passwords cannot be injected.
  • Certificated cannot be injected.
  • Some customized ECS configurations may not be supported.

If you do not delete the automatic attaching detection information of user disks from the fstab file, the ECS created using the private image may fail to start.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top