How Long Does It Take to Obtain an ECS?


Obtaining an ECS can take as little as a few minutes.

The time it takes to obtain an ECS depends on ECS specifications, available resources (such as EVS disks and EIPs), and system load.

Other related questions:
How long does active/standby switchover take
The duration of active/standby switchover depends on the triggering condition. -If the active/standby switchover is caused by an interface or link fault, the switchover completes within milliseconds. -If the active/standby switchover is caused by a device failure, the switchover completes within five heartbeat intervals.

Time spent on LUN formatting
The formatting speed of a single disk can be 50 MB/S. A maximum of four RAID groups can be formatted. The LUNs in the same RAID group are formatted in serial mode.

How Long Does It Take to Create a Private Image Using an ECS?

It takes about 20 minutes to create a private image using an ECS.

Time taken for fault detection
The fault detection time varies according to faulty types. For example, the LOF alarm detection time takes 3 ms.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top