Whether different TCs are configured for different FusionAccess application scenarios

4

Different TCs are configured for different FusionAccess application scenarios. For details, visit http://support.huawei.com/huaweiconnect/enterprise/thread-261883.html.

Other related questions:
What are the differences between AP restart modes and what are their application scenarios
You can restart an AP in the following ways: run the reset command on the AC, log in to the AP and restart it, hold down the RESET button on the AP, and power off and on the AP. The differences and application scenarios of these restart modes are as follows: - Run the reset command on the AC: Run the ap-reset { all | id ap-id | ap-type { type ap-type | type-id type-id } } command in the WLAN view to restart a specified AP or APs in batches. This command applies only to online APs. - Log in to the AP and restart it: Log in to the AP and run the reboot command in the user view to restart the AP. You can restart an AP using this method only after you log in to the AP using Telnet or through the console port. This method is used to restart APs that are not online on the AC. You can connect a PC to the wired interface of the AP and log in to the AP using Telnet. - Hold down the RESET button on the AP: Using this method, you can restart an AP without the need to get the AP online or log in to the AP. - Power off and on the AP: If the AP uses PoE power supply, run the undo poe enable and poe enable commands in the interface view of the power sourcing equipment (PSE) to restart the AP.

Whether licenses of different FusionAccess versions can be interchangeably used
For Huawei products, licenses of the same R version can be interchangeably used. That is, licenses of R5C10 can be directly imported into the R5C20 environment. As restricted by the FusionAccess R5C20 platform, only one license file can be imported. For example, the licenses of 40 users in phase 1 and those of 400 users in phase 2 need to be combined into one license file. The combination process is as follows: 1. Change the ESN of the licenses of 40 users on the ESDP platform to that of the new R5C20 environment. 2. Use the contract number of phase 2 to activate the FusionAccess licenses of 400 users and use the ESN of the newly established R5C20 environment. 3. Combine licenses with the same ESN on the ESDP platform and download the license file of 440 users.

Difference between DeviceManager Demo and DeviceManager in actual application scenarios
Data provided by DeviceManager Demo is generated in simulated scenarios and can be queried and operated in Demo. However, the operation results may be different from those in actual application scenarios.

Differences between FusionAccess licenses and concurrent licenses
FusionAccess licenses are assigned based on the maximum number of available user accounts while concurrent licenses are assigned based on the maximum number of users who can connect to a terminal concurrently. The two types of licenses have different dimensions and application scenarios. Generally, FusionAccess licenses apply to scenarios where a user has one or several virtual desktops that are frequently used, such as OA office. Concurrent licenses apply to scenarios where a user has one virtual desktop or several users share one VM or VM resource pool that is infrequently used, such as meeting terminals, call centers, and multimedia classrooms.

Differences between the firewall's applications and services
Services refer to well-known protocols or user-defined protocols. A service may be used by multiple applications. Therefore, applications are more fine-grained than services in security control. A service may contain multiple applications.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top