Password used when a TC is added to TCM

18

The default password centerm123!@# is used when a TC is added to TCM.

Other related questions:
Method used to restore a TC password
You can restore a TC password by resetting the TC to factory settings. Note that all user configurations will be lost after this operation. The steps for resetting the TC are as follows: 1. Restart the TC and press Ctrl during the startup. 2. Press Ctrl+U and select Restore ConfigurationRestore from the displayed menu.

How to reset the password for logging in to a TC
You can use TCM to reset the password for logging in to a TC. You can restore a Linux TC to its factory settings or log in to a Windows TC as the Admin user and change the password. If you want to restore the default settings of a Windows TC, you need to refresh the system.

Default TC username and password
The default TC username and password are: Username: user Password: User123!

How do I change the authentication password configured when adding the SC?
To change the authentication password of the SC, run the account command and then the password-smc command in the user view, and enter the old and new passwords as prompted.

How do I fill in the password when an endpoint is added using the ViewPoint 8650 MCU conference management function?
Log in to the MCU in CLI mode to fill in the password when an endpoint is added using the ViewPoint 8650 MCU conference management function: system-view manage-config connect type{0:smc2.0 1:inside web 2:rm/ims}[2]: set the interface{0:METH 1:GE0 2:GE1 -1:ANY}[1]: local-listening-port{0 - 65535}[5002]: encrypt enable{0:disable 1:enable}[disable]: enable SSL Encrypt{0:disable 1:enable default:0}[0]: connect password{string, max len:16}[******]: Info:set the manage config finish!

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top