Whether CT3100 supports RDP

4

CT3100 supports Remote Desktop Protocol (RDP). You can click the Add button on the terminal connector management page and select RDP for the connection type.

Other related questions:
Method used to reset CT3100 to factory settings
You can reset CT3100 to factory settings as follows: (Note that all user configurations will be lost after the operations, so perform the operations with caution.) 1. Restart the TC and press Ctrl during the startup. 2. Press Ctrl+U and select Restore ConfigurationRestore from the displayed menu.

Password used when a TC is added to TCM
The default password centerm123!@# is used when a TC is added to TCM.

Do conference endpoints support SIP and H.323
HUAWEI 9000 HD videoconferencing endpoints and TE series endpoints all support the SIP and H.323 protocols. You can log in to the endpoint web interface to set the SIP or H.323 parameters. HUAWEI 9000 HD videoconferencing endpoints and TE series endpoints can use the SIP and H.323 protocols to directly call the IP address of a site or call a site's number after registering with the GK.

Whether data is automatically rebuilt when a hard disk fails
RAID controller cards support redundancy check. If a member disk fails and a hot spare is available, data is automatically rebuilt on the hot spare. RAID 5, RAID 6, and RAID 50 support redundancy check. The data rebuild time depends on the hard disk capacity, RAID level, and customer service data volume.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top