Steps for adjusting a VM's memory specifications


You can adjust a VM's memory specifications as follows:
1. On FusionCompute, click VM and Template.
2. Click the name of the target VM.
3. On the Hardware tab, click Memory.
4. Enter a memory size for the VM.
5. Set the parameters under Memory Resource Control:
Quota specifies the memory weight a VM can obtain in resource contention. This defines the VM's relative priority or importance.
Reserved (MB) specifies the minimum physical memory reserved for the VM. If Reserved (MB) is set to 0, the system reserves the minimum memory resources required for the VM.
6. Click OK.
7. Click OK.
8. Restart the VM.

Other related questions:
How to enable VM memory overcommitment
The procedure for enabling VM memory overcommitment is as follows: 1. Log in to FusionCompute and choose Computing Pool. 2. Select a cluster and click Configure. 3. On the Configuration page, click Control Cluster Resource. 4. Enable host memory overcommitment. 5. Click OK. ----End

Steps for assigning VMs
You can assign VMs as follows: 1. On the FusionAccess portal, choose Desktop > Desktop Group. The page for managing desktop groups is displayed. 2. On the desktop group management page, select the target desktop group in the list, and click Assign VM. 3. On theAssign VM page, configure basic information for the desktop group based on the obtained data. Note: The assignment type is Multiple Users: (1) If user A has logged in to a VM, user B cannot log in to the VM. (2) If user A logs in to a VM and then disconnects from it without logging out, user B can log in to the VM and user A is forcibly logged out at the same time. 4. Click OK. The system displays a message indicating that the VM is assigned. 5. Click Return to Desktop Group List. You can view information about the desktop group on this page.

Steps for deleting a user VM
You can delete a user VM as follows: 1. On the FusionAccess portal, choose Desktop > All Computers. 2. Select the VM to be deleted and click Unassign VM. 3. Click Confirm. 4. Click OK. On the All Computer page, the VM's Assignment type becomes Unassigned and its Running Status becomes Stopped. 5. Select the VM to be deleted and click Delete. 6. Click Confirm. 7. Click OK. 8. Select Task Center. If the status displayed in the task status box is Completed, the VM has been deleted successfully.

Method used to check whether a VM's memory has been adjusted
You cannot check whether a VM's memory has been adjusted.

Steps for scanning VM hard disks
You can scan a hard disk as follows: 1. On the taskbar of the VM OS, select Start and enter compmgmt.msc in Search programs and files to go to the Computer Management window. 2. In the navigation tree on the left, expand Storage. 3. Right-click Disk Management and choose Rescan Disks.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top