Method used to check whether a VM is registered

21

You can use the one-click check tool to check whether a VM is registered.

Other related questions:
Method used to check whether a VM's memory has been adjusted
You cannot check whether a VM's memory has been adjusted.

Method used to check whether a disk is faulty
Method used to check whether a disk is faulty: If a disk is faulty, the red indicator on the disk is on and alarms are displayed on the ISM GUI. Check the message log by searching for the keywords hardware error.

Does the number of SC registered nodes of the SMC2.0 includes the number of registered soft clients?
1. On the web interface of the SMC2.0, choose Help > license and check the number of registered soft clients. 2. The number of SC registered nodes includes the number of soft client nodes. However, the number of soft client nodes is also independently limited by the license of soft client nodes. For example, if the maximum number of nodes is 10 and the number of soft client nodes is 5, the SC can register five soft clients and five other devices.

Simple methods to check whether the site is at risk of corrosion
1. Ensure the equipment room is not near any sulfurous gas emission sources. For example, porcelain factories, rubber plants, tire factories, chemical factories, sewage plants, power stations, paper mills, smelters, automobile factories, coal mines, electroplating factories, food factories, and tanneries Gas emissions may cause environmental corrosion 2. Ensure the equipment room is not near the sea, salt lakes, sewer outlets, sewage treatment tanks, and industrial/heating boilers. These factors may cause environmental corrosion. 3. Check whether the equipment room was decorated in the latest six months? The emissions released by certain chemical solvents may cause environmental corrosion 4. Check whether batteries are stocked in the equipment room, and if so, whether the batteries leak? If batteries leak, this may cause environmental corrosion. 5. Ensure that the equipment room is closed tightly, including the room windows and doors are always closed. If not, environmental corrosion risks may exist.

Methods used to copy files to a VM
You can copy files to a VM in the following ways: 1. Configure a USB port redirection policy and copy the files using USB devices, such as a USB flash drive. 2. Enable the VM's remote desktop function and copy the files. 3. Copy the files in folder sharing mode.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top