Steps for scanning VM hard disks

7

You can scan a hard disk as follows:
1. On the taskbar of the VM OS, select Start and enter compmgmt.msc in Search programs and files to go to the Computer Management window.
2. In the navigation tree on the left, expand Storage.
3. Right-click Disk Management and choose Rescan Disks.

Other related questions:
Full disk scanning for hard disks of the USG6000 series
Disks may be bumped during delivery, which may cause disk failures. Before usage, you can perform full disk scanning to repair the disks. Full disk scanning takes 2 to 3 hours. Note: Hard disk self-check interrupts hard disk services. Exercise caution when you perform full disk scanning. 1. Install the hard disk to the device. 2. In the system view, run the disk offline command to enable the hard disk to go offline. 3. In the diagnose view, run the disk self-test enable command to perform full disk scanning. 4. In the diagnose view, run the display disk self-test command to view the result of disk self-check. Progress: displays the progress. For example, in 2/46, 46 indicates that the operation may take 46 minutes, and 2 indicates that 2 minutes have elapsed. The actual time taken shall no longer than 46 minutes. Otherwise, the disk is faulty. ErrorType: Selftest complete without error: indicates that the hard disk is not faulty. Send command failed!: indicates that you shall run the self-check command again. Other: indicates that the hard disk is faulty, and you need to replace it or contact professionals for analysis. DiskSN: indicates the SN of the current hard disk. The self-check result corresponds to the SN.

Steps for assigning VMs
You can assign VMs as follows: 1. On the FusionAccess portal, choose Desktop > Desktop Group. The page for managing desktop groups is displayed. 2. On the desktop group management page, select the target desktop group in the list, and click Assign VM. 3. On theAssign VM page, configure basic information for the desktop group based on the obtained data. Note: The assignment type is Multiple Users: (1) If user A has logged in to a VM, user B cannot log in to the VM. (2) If user A logs in to a VM and then disconnects from it without logging out, user B can log in to the VM and user A is forcibly logged out at the same time. 4. Click OK. The system displays a message indicating that the VM is assigned. 5. Click Return to Desktop Group List. You can view information about the desktop group on this page.

Why the number of hard disks scanned by the application server is a multiple of the number of hard disks mapped to the application server?
The multipathing software is not installed. If the multipathing software is not installed, the OS cannot determine whether the LUNs scanned from several physical paths are the same LUN, and assumes them as different LUNs; therefore, multiple mock disks appear on the AS. If the multipathing software is installed, it can determine whether the LUNs in different sessions are the same LUN by analyzing the world wide name (WWN) of each LUN, and eliminates the mock disks. In this way, the number of hard disks scanned by the AS is the number of LUNs actually mapped to the AS. You can obtain the installer of the multipathing software from the delivery-attached CD-ROM and install the program according to the actual OS.

Steps for deleting a user VM
You can delete a user VM as follows: 1. On the FusionAccess portal, choose Desktop > All Computers. 2. Select the VM to be deleted and click Unassign VM. 3. Click Confirm. 4. Click OK. On the All Computer page, the VM's Assignment type becomes Unassigned and its Running Status becomes Stopped. 5. Select the VM to be deleted and click Delete. 6. Click Confirm. 7. Click OK. 8. Select Task Center. If the status displayed in the task status box is Completed, the VM has been deleted successfully.

Steps for quickly provisioning a user VM
To quickly provision a user VM, perform the following steps: 1. Create and configure a VM. 2. Assign a desktop. 3. Provision the desktop. For detailed operations, see the "Quickly Provisioning Desktops" section in FusionCloud Desktop Virtual Desktop Management Guide. Download path: Click the link and choose Support > IT > Cloud Computing > FusionCloud > FusionCloud Desktop Solution.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top