Bandwidth range for GPU pass-through


The bandwidth required for GPU pass-through ranges from 10 Mbit/s to 60 Mbit/s.

Other related questions:
What is the range of bandwidth rate limit
The bandwidth rate limit ranges from 1 Mbps to 300 Mbps.

Fiber connections for pass-through wavelengths
The typical subrack fiber connection diagram in the product documentation provides all types of fiber connections. For details about the fiber connections for pass-through wavelengths, see the related topic in the product documentation.

Does the SBC need to pass through the firewall?
The SBC can be deployed behind the firewall and is mapped to the public network through the firewall. Alternatively, the SBC can be directly deployed on the public network and two network ports are configured for the SBC to connect to the intranet and extranet separately.

Traffic is not passing through ETH trunk in LAG configuration?
STP is enabled by default, check the ports status to see if they are blocked.

Do AC interfaces allow Jumbo frames to pass through
Ethernet frames longer than 1518 bytes or VLAN frames longer than 1522 bytes are called Jumbo frames. During a high-throughput data exchange such as a file transfer, an Ethernet interface of an AC may receive Jumbo frames. The AC discards Jumbo frames without processing them. When the Ethernet interface is configured to allow Jumbo frames to pass through, the AC processes the received Jumbo frames with the length within the specified range. Run the jumboframe enable [ value ] command in the interface view to configure an interface to allow Jumbo frames to pass through. In the command, value specifies the maximum length of Jumbo frames that are allowed to pass through an Ethernet interface. The value is an integer that ranges from 1536 to 12288, in bytes. Note: Fat APs do not support this command.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top