Methods used to adjust VM configurations online

19

VM CPU and memory specifications can be modified online, but any changes will only take effect after a restart.
Virtual disks (only data disks, this does not include system disks) can be mounted to or unmounted from a VM in offline mode. Virtual NICs can also be added or removed to increase or decrease a VM's number of NICs. This feature satisfies user requirements for multi-NICs.

Other related questions:
Method used to check whether a VM's memory has been adjusted
You cannot check whether a VM's memory has been adjusted.

Method used to adjust CT3000 resolution
You can adjust CT3000 resolution as follows: 1. Open the Control Center of CT3000 and select Display: 2. Select Optimum settings from the Settings tab page on the displayed window and the system will automatically detect the optimal resolution. Alternatively, you can set the resolution on the DVI or VGA tab page based on your requirements.

Method used to adjust the fan speed
In the NE Explorer, choose Configuration > Fan Attribute. In the right-hand pane, select Adjustable Speed in Fan Speed Mode. Then set Fan Speed Level as required. You are advised to select Auto Speed in Fan Speed Mode.

Methods used to copy files to a VM
You can copy files to a VM in the following ways: 1. Configure a USB port redirection policy and copy the files using USB devices, such as a USB flash drive. 2. Enable the VM's remote desktop function and copy the files. 3. Copy the files in folder sharing mode.

Steps for adjusting a VM's memory specifications
You can adjust a VM's memory specifications as follows: 1. On FusionCompute, click VM and Template. 2. Click the name of the target VM. 3. On the Hardware tab, click Memory. 4. Enter a memory size for the VM. 5. Set the parameters under Memory Resource Control: Quota specifies the memory weight a VM can obtain in resource contention. This defines the VM's relative priority or importance. Reserved (MB) specifies the minimum physical memory reserved for the VM. If Reserved (MB) is set to 0, the system reserves the minimum memory resources required for the VM. 6. Click OK. 7. Click OK. 8. Restart the VM.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top