Does the configuration need to be committed after an AP is powered off

1

After restarting and going online on an AC, a Fit AP automatically obtains configuration from the AC. You do not need to deliver the configuration again or reconfigure the AP.

Other related questions:
Does the license need to be loaded or activated again after an S serieS series switches restarts
For an S series (except the S1700) switch: - When the switch is powered off, restarted, or upgraded, you do not need to apply for, load, or activate the license again because the license status is automatically recovered. - After a license is loaded or activated, the switch does not need to be restarted.

Does the clock work properly after an S series fixed switch is powered off
If some models and versions of S series fixed switches (except S1700 switches) are powered off, the clock can recover. For some other models and versions, the clock cannot recover. For details, see the following: - For switches running a version earlier than V100R006: The system clock of a switch is implemented by the software. The system saves the system clock if the switch is powered off and restarted manually. If the switch is powered off due to a power failure, the system time is restored to the factory setting. - For switches running V100R006 or V200R001: The system clock of the S3700HI, S5700HI, or S6700 is implemented by the hardware. The system obtains the clock from the hardware if the switch is powered off and restarted manually. System clocks of other models are implemented by the software. The system saves the system clock if a switch is powered off and restarted manually. If the switch is powered off due to a power failure, the system time is restored to the factory setting. - For switches running V200R002 and V200R003: The system clock of the S5700HI or S6700 is implemented by the hardware. The system obtains the clock from the hardware if the switch is powered off and restarted manually. System clocks of other models are implemented by the software. The system saves the system clock if the switch is powered off and restarted manually. If the switch is powered off due to a power failure, the system time is restored to the factory setting. - For switches running V200R005 or a later version: The system clock of the S5700 or S6700 is implemented by the hardware. The system obtains the clock from the hardware if the switch is powered off and restarted manually. System clocks of other models are implemented by the software. The system saves the system clock if a switch is powered off and restarted manually. If the switch is powered off due to a power failure, the system time is restored to the factory setting.

Does U19 support power-off survival
U19 supports power-off survival. It doesn't need to configure, just connect port O and port S of U19.

How can I power off the DP300?
To power off the DP300: Tap the power button in the lower right corner of the display twice or turn the power switch on the right panel to OFF.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top