Function of AC country code

15

A country code identifies the country to which WLAN radios belong. Different countries support different AP radio attributes, including the transmit power and supported channels.
When configuring an AC for the first time, configure a correct global country code and a country code in the AP region view to comply with local laws and regulations.

Other related questions:
Configure basic services of the Fat AP on the AR
You can configure the Fat AP service to enable users to easily access a wireless network and move around within the coverage of the wireless network. The procedure for configuring the basic function of the Fat AP is as follows: 1. Configure the WLAN mode of the device, basic parameters of the AP, and the addresses allocated to STAs. 2. Configure WLAN service VAPs. After APs go online, you can configure service VAPs for the APs to provide differentiated WLAN services for users. The detailed configuration is as follows: Create a WMM profile and a radio profile, bind the WMM profile to the radio profile, create a security profile and a traffic profile, configure a WLAN-BSS interface and a WLAN service set, bind the WLAN-BSS interface, security profile, and traffic profile to the WLAN service set, configure a radio, and bind the radio profile and VAP to the radio. For details, see Example for Configuring Wireless User Access to a WLAN.

How to obtain a license revocation code on the AC
A license revocation code is a character string generated after you run the license revoke command. The revocation code determines whether a license file is invalid. To obtain the revocation code, perform the following steps: - Run the license revoke command to make the current license enter the Trial state, and obtain the license revocation code. - After the license enters the Trial state, you can also run the display license revoke-ticket command to obtain the license revocation code.

What are functions of GTL license invalidation codes
Before applying for a new license, a user must run the license revoke command to obtain the invalidation code. The user needs to apply to Huawei for a new GTL license using the invalidation code and upload the GTL license file to the storage device.

Is the license required for the AC function on the AR
V200R008: AR100, AR120, AR500 (AR502G-L-D-H, AR502GR-L-D-H, AR502EG-L, AR502EGW-L, and AR502CG-L do not support the AC), and AR510 series routers do not require the license for the AC function, and they can connect to a maximum of four APs. When the license and value-added service package for data services are not loaded, a maximum of four APs can connect to the AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600. To connect more APs, load the the license and value-added service package for data services. AR110-S&AR120-S&AR101-S&AR101W-S&AR150-S&AR160-S&AR200-S&AR1200-S&AR101GW-Lc-S do not require the license for the AC function. The maximum number of APs is as follows: AR110-S&AR120-S&AR101-S&AR101W-S&AR101GW-Lc-S: 4 AR150-S&AR160-S&AR200-S: 8 AR1200-S: 12 When the license and value-added service package for data services are not loaded, a maximum of four APs can connect to the AR2200-S and AR3200-S. To connect more APs, load the the license and value-added service package for data services. When the license and value-added service package for data services are not loaded, a maximum of two APs can connect to the NE16EX. To connect more APs, load the the license and value-added service package for data services. V200R007: AR120, AR500 (AR502G-L-D-H and AR502GR-L-D-H do not support the AC), and AR510 series routers do not require the license for the AC function, and they can connect to a maximum of four APs. When the license and value-added service package for data services are not loaded, a maximum of four APs can connect to the AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600. To connect more APs, load the the license and value-added service package for data services. AR110-S&AR120-S&AR101-S&AR101W-S&AR150-S&AR160-S&AR200-S&AR1200-S&AR101GW-Lc-S do not require the license for the AC function. The maximum number of APs is as follows: AR110-S&AR120-S&AR101-S&AR101W-S&AR101GW-Lc-S: 4 AR150-S&AR160-S&AR200-S: 8 AR1200-S: 12 When the license and value-added service package for data services are not loaded, a maximum of four APs can connect to the AR2200-S and AR3200-S. To connect more APs, load the the license and value-added service package for data services. When the license and value-added service package for data services are not loaded, a maximum of two APs can connect to the NE16EX. To connect more APs, load the the license and value-added service package for data services. For the license for the WLAN AC in V200R006 and earlier versions, see Product Documentation.

How to enable the Telnet server function for a WLAN device
By default, the Telnet server function is enabled for WLAN devices of V200R003 and earlier versions and disabled for WLAN devices of V200R005 and later versions. Run the telnet server enable command to enable the Telnet server function. For a Fit AP, if it has gone online on an AC, run the telnet enable command in the AP profile view of the AC to enable the Telnet service for this Fit AP.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top