How to to check whether a valid management exists the AP

20

Log in to the AP and run the display system-information command. If a management VLAN is incorrectly configured for the AP, run the undo management-vlan command on the AC to delete the management VLAN, and restart the AP.

Other related questions:
How can I check whether a loop exists on an S series switch
The simplest way to check the existence of a loop on an S series switch (except the S1700) is to check whether a MAC address flapping alarm exists on the switch. If the alarm exists, you can quickly locate the loop based on the information in the alarm. Run the display mac-address flapping record command to check whether MAC address flapping exists, or run the display trapbuffer command to check whether the alarm contains The mac-address has flap value or MAC move detected. For more information, visit Layer 2 Loop Troubleshooting.

How to check whether the AP is a Fit or Fat AP?
Log in to the AC and check: system-view [Huawei] diagnose [Huawei-diagnose] display image //Check AP status.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top