Why do WLAN devices allow only some users to access the web page

20

WLAN devices allow only some users to access the web page:
When a WLAN device functions as an HTTPS server, you can configure an ACL on the device to allow only the specified clients to log in to it through HTTPS. This function improves system security.
[Huawei] acl 2000 //Set the ACL number to 2000 for the HTTPS IPv4 server.
[Huawei-acl-basic-2000] rule 1 permit source 10.1.1.1 0 //Allow only users on the network segment 10.1.1.1 to access the web page.
[Huawei-acl-basic-2000] quit
[Huawei] http acl 2000 //Configure the HTTP login restriction.

Other related questions:
Only a part of users are allowed to access the web pages of an AR router
You can configure ACL rules on an AR router to control web access permission. The configuration can be implemented using command lines or through the web NMS. 1. Command lines: For the sake of security, configure an ACL on the router to limit clients which can log in to the device in HTTPS mode if the device is used as an HTTPS server. [Huawei] acl 2000 //Set the ACL number of an HTTPS IPv4 server to 2000. [Huawei-acl-basic-2000] rule 5 permit source 10.1.1.1 0 [Huawei-acl-basic-2000] quit [Huawei] http acl 2000 //Configure an HTTP login limit. 2. Web NMS: For details, choose Web-based Configuration > Security > ACL.

What is the port for remotely accessing the BMU through web pages?
The port for logging in to the BMU administrator page is 18443. The port for logging in to the personal self-service platform is 8443.

Allow specified IP addresses to access the Internet through an interface on an S series switch
You can configure an ACL-based traffic policy and apply the traffic policy to an interface on an S series switch to allow specified IP addresses to access the Internet through the interface. For example, configure GE0/0/1 to allow only the user with the IP address of 1.1.1.2 and prevent all other users to access the Internet. [HUAWEI] acl number 3030 [HUAWEI-acl-adv-3030] rule permit ip source 1.1.1.2 0 [HUAWEI-acl-adv-3030] quit [HUAWEI] acl number 3031 [HUAWEI-acl-adv-3031] rule permit ip [HUAWEI] traffic classifier test1 [HUAWEI-classifier-test1] if-match acl 3030 [HUAWEI] traffic classifier test2 [HUAWEI-classifier-test2] if-match acl 3031 [HUAWEI] traffic behavior test1 [HUAWEI-behavior-test1] permit [HUAWEI] traffic behavior test2 [HUAWEI-behavior-test2] deny [HUAWEI] traffic policy test [HUAWEI-trafficpolicy-test] classifier test1 behavior test1 [HUAWEI-trafficpolicy-test] classifier test2 behavior test2 [HUAWEI] interface gigabitethernet 0/0/1 [HUAWEI-GigabitEthernet0/0/1] traffic-policy test inbound

How to impose the restriction that some users under the U1980 are only allowed to dial certain prefixes
Use the customized rights. 1. Add a prefix with the cus1 right. config add prefix dn 888 callcategory basic callattribute inter cusattribute cus1 cldpredeal no minlen 3 maxlen 3 2. On the user management page of the web management system, select the service rights for the corresponding numbers. In the outgoing call rights, select cus1 for users who are allowed to call this prefix and do not select cus1 for users who are not allowed to call this prefix.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top