How to change the web password of WLAN devices

15

To change the web password of WLAN devices, perform the following steps:
If the web login password is lost or you want to change the existing web login password, you can log in to the device using other methods, such as the console port or Telnet, and set the password again.
1. Log in to the device using other methods, such as the console port.
2. Change the user password.
The following command output is an example that sets the user name to huawei and the new password to Huawei@123 in AAA authentication:
[Huawei] aaa
[Huawei-aaa] local-user huawei password irreversible-cipher Huawei@123
[Huawei-aaa] local-user huawei service-type http //Set the access type of huawei to HTTP.
[Huawei-aaa] local-user huawei privilege level 15

Other related questions:
How to change the password of a Telnet user to log in to a WLAN device
You can log in to a WLAN device through the console port and then set a new Telnet password for login. - The following is an example of logging in to VTY 0 using password Huawei@123. The configurations are as follows: [Huawei] user-interface vty 0 [Huawei-ui-vty0] authentication-mode password [Huawei-ui-vty0] set authentication password cipher Huawei@123 [Huawei-ui-vty0] return - The following is an example of logging in to VTY 0 based on AAA authentication and changing the password of Telnet user admin123 into Huawei@123. The configurations are as follows: [Huawei] user-interface vty 0 [Huawei-ui-vty0] authentication-mode aaa [Huawei-ui-vty0] quit [Huawei] aaa [Huawei-aaa] local-user admin123 password irreversible-cipher Huawei@123 [Huawei-aaa] return

Change the SSID on WLAN devices
Change the SSID on WLAN devices. Command output on the CLI: [HUAWEI]wlan [HUAWEI-wlan-view]service-set name test [HUAWEI-wlan-service-set-test]ssid huawei If the SSID is in use and cannot be modified, unbind SSID invocation and change the SSID again.

What are the default web user name and password of WLAN devices
The default web user name and password of WLAN devices vary among different models and versions. - For ACs: The default user name and password of ACs in V200R002 are admin and admin, respectively, and those of ACs in V200R003 and later versions are admin and admin@huawei.com, respectively. - For Fat APs: The default user name and password are admin and admin@huawei.com, respectively.

How to enable the web function on WLAN devices
The procedure for enabling the web function on WLAN devices is similar. The AC is used as an example:
1. Log in to the AC through the console port or Telnet.
2. Configure the management IP address.
[AC6605] vlan 10
[AC6605-vlan10] quit
[AC6605] interface Vlanif 10 // Configure VLANIF 10 as the management interface.
[AC6605-Vlanif10] ip address 192.168.200.161 24 //Configure the IP address of the web platform.
[AC6605-Vlanif10] quit
[AC6605] interface gigabitethernet 0/0/1 //GE0/0/1 is the number of the physical interface that connects the AC and PC using the web platform to log in to the AC. Set this parameter based on network situations. 
[AC6605-GigabitEthernet0/0/1] port link-type trunk
[AC6605-GigabitEthernet0/0/1] port trunk allow-pass vlan 10
[AC6605-GigabitEthernet0/0/1] quit
3. Enable the HTTP or HTTPS service.
   - Enable the HTTP service.
   [AC6605] http server enable //The HTTP service is enabled by default.
   - Enable the HTTPS service.
   [AC6605] http secure-server enable //The HTTPS service is enabled by default.
4. Configure the web platform users.
[AC6605] aaa
[AC6605-aaa] local-user admin password irreversible-cipher Helloworld@6789
[AC6605-aaa] local-user admin privilege level 15
[AC6605-aaa] local-user admin service-type http
[AC6605-aaa] quit
5. Log in to the web platform.
Open the web browser on your PC, and enter http://192.168.200.161 (IP address configured in Step 2) in the address box. Press Enter. The web platform login page is displayed.

How to disable the web function on WLAN devices
To disable the web function, you need to disable the HTTP server function on WLAN devices. Perform the following steps: [Huawei] undo http server enable For V200R005 and later versions, the HTTPS function is enabled by default. You must disable HTTPS after disabling the HTTP server function. [Huawei] undo http secure-server enable

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top