How to disable the web function on WLAN devices

5

To disable the web function, you need to disable the HTTP server function on WLAN devices. Perform the following steps:
[Huawei] undo http server enable
For V200R005 and later versions, the HTTPS function is enabled by default. You must disable HTTPS after disabling the HTTP server function.
[Huawei] undo http secure-server enable

Other related questions:
How to enable the web function on WLAN devices
The procedure for enabling the web function on WLAN devices is similar. The AC is used as an example:
1. Log in to the AC through the console port or Telnet.
2. Configure the management IP address.
[AC6605] vlan 10
[AC6605-vlan10] quit
[AC6605] interface Vlanif 10 // Configure VLANIF 10 as the management interface.
[AC6605-Vlanif10] ip address 192.168.200.161 24 //Configure the IP address of the web platform.
[AC6605-Vlanif10] quit
[AC6605] interface gigabitethernet 0/0/1 //GE0/0/1 is the number of the physical interface that connects the AC and PC using the web platform to log in to the AC. Set this parameter based on network situations. 
[AC6605-GigabitEthernet0/0/1] port link-type trunk
[AC6605-GigabitEthernet0/0/1] port trunk allow-pass vlan 10
[AC6605-GigabitEthernet0/0/1] quit
3. Enable the HTTP or HTTPS service.
   - Enable the HTTP service.
   [AC6605] http server enable //The HTTP service is enabled by default.
   - Enable the HTTPS service.
   [AC6605] http secure-server enable //The HTTPS service is enabled by default.
4. Configure the web platform users.
[AC6605] aaa
[AC6605-aaa] local-user admin password irreversible-cipher Helloworld@6789
[AC6605-aaa] local-user admin privilege level 15
[AC6605-aaa] local-user admin service-type http
[AC6605-aaa] quit
5. Log in to the web platform.
Open the web browser on your PC, and enter http://192.168.200.161 (IP address configured in Step 2) in the address box. Press Enter. The web platform login page is displayed.

How to disable the Telnet server function for a WLAN device
By default, the Telnet server function is enabled for WLAN devices of V200R003 and earlier versions and disabled for WLAN devices of V200R005 and later versions. Run the undo telnet server enable command to disable the Telnet server function. For a Fit AP, if it has gone online on an AC, run the telnet disable command in the AP profile view of the AC to disable the Telnet service for this Fit AP.

How to enable or disable interfaces of a WLAN device
If parameters of an interface are modified but the new configuration does not take effect immediately, you can use the shutdown command to shut down the interface and then use the undo shutdown command to start it (running the shutdown and undo shutdown commands is equivalent to running the restart command). The modified parameters will then take effect. Perform the following steps to disable an interface of a WLAN device: 1. Run the system-view command to enter the system view. 2. Run the interface interface-type interface-number command in the system view to enter the specified interface view. 3. Run the shutdown command in the interface view to disable the interface. By default, an interface is enabled. Note: - Data frames may be lost or services may be interrupted if you disable an interface during data transmission. Exercise caution when you use the shutdown command. - If you run the shutdown command in the Eth-Trunk interface view, all the member interfaces of the Eth-Trunk are disabled. - A null interface is always Up and cannot be enabled or disabled through commands. - A loopback interface is always Up and cannot be enabled or disabled through commands. Perform the following steps to enable an interface of a WLAN device: 1. Run the system-view command to enter the system view. 2. Run the interface interface-type interface-number command in the system view to enter the specified interface view. 3. Run the undo shutdown command in the interface view to enable the interface. By default, an interface is enabled.

How to disable the web function on an AR router
How to disable the web function on an AR router? For routers that support web NMS, disable the HTTP server on the routers to disable the web function. Specific method is as follows: [Huawei] undo http server enable //Disable the HTTP service. [Huawei] undo http secure-server enable //Disable the HTTPS service.

How to disable wireless signals of a WLAN device
To save energy or ensure security, run the following commands to disable AP radios or WLAN services: 1. Disable a specified radio. - For AC+Fit AP networking V200R005: [AC6605] wlan [AC6605-wlan-view] ap 0 radio 0 [AC6605-wlan-radio-0/0] undo radio enable For V200R006: [AC6605] wlan [AC6605-wlan-view] ap-id 1 [AC6605-wlan-ap-1] radio 0 [AC6605-wlan-radio-1/0] radio disable Warning: This action may cause service interruption. Continue?[Y/N]y - For Fat APs V200R005: [Huawei] interface wlan-radio 0/0/0 [Huawei-Wlan-Radio0/0/0] undo radio enable For V200R006: [Huawei] interface wlan-radio 0/0/0 [Huawei-Wlan-Radio0/0/0] radio disable Warning: This action may cause service interruption. Continue?[Y/N]y 2. Prevent users from accessing the WLAN in the specified time range. For V200R005: [AC6605] wlan [AC6605-wlan-view] auto-off service ess service-set id 0 start-time 01:00:00 end-time 07:00:00 //Disable the service set with ID 0 from 1:00:00 to 7:00:00. For V200R006: [HUAWEI]wlan [HUAWEI-wlan-view]vap-profile name vap1 [HUAWEI-wlan-vap-prof-vap1]auto-off service start-time 1:00:00 end-time 7:00:00 //Disable a VAP from 1:00:00 to 7:00:00. 3. Disable an AP radio in a scheduled time using the auto-off service radio command (V200R005). For AC+Fit AP networking: [AC6605] wlan [AC6605-wlan-view] auto-off service radio ap-id 0 radio-id 0 start-time 1:00:00 end-time 7:00:00 //Disable radios 0 of AP 0 from 1:00:00 to 7:00:00. For Fat APs: [Huawei] wlan [Huawei-wlan-view] auto-off service radio interface wlan-radio0/0/0 start-time 1:00:00 end-time 7:00:00 //Disable AP interface wlan-radio0/0/0 from 1:00:00 to 7:00:00.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top