Configure the time period when idle users go offline


For WLAN devices, if a user produces a little or no network traffic for a long time after going online, the user still occupies certain bandwidth, which reduces the access rate of other users. In this case, the idle-cut function can be configured to disconnect the users whose traffic volume stays below the traffic threshold within the idle time. This function reduces resource waste and improves Internet access experience of other users. The configuration is as follows:
1.  Enter the AAA authentication scheme view, and configure the idle-cut function and related parameters. 
<AC6605> system-view
[AC6605] aaa
[AC6605-aaa] service-scheme huawei
[AC6605-aaa-service-huawei] idle-cut 1 10  //Set the idle-cut interval to 1 minute and the traffic threshold to 10 kbit/s.
[AC6605-aaa-service-huawei] quit
2. Enter the AAA domain view, and enable traffic statistics collection.
[AC6605-aaa] domain huawei
[AC6605-aaa-domain-huawei] statistic enable

Other related questions:
How to force Telnet users to go offline on a WLAN device
If some login users occupy the user interface continuously or need to be forbidden from operating a WLAN device, run the free user-interface { ui-number | ui-type ui-number1 } command in the user interface view to remove the users from the specified user interface and disconnect them from the device. The configurations are as follows: free user-interface vty 3 Warning: User interface vty3 will be freed. Continue? [Y/N]:y Note that these 2 commands cannot be executed on the user that has logged in to the device currently.

How to deny access of APs
For V200R005, to deny access of a specified AP, delete the AP or add it to the blacklist. Run the following commands on an AC: [HUAWEI]wlan [HUAWEI]undo ap id xx [HUAWEI]ap-blacklist mac x-x-x For V200R006, to deny access of a specified AP, delete the AP or add it to the blacklist. Run the following commands on an AC: Delete the AP with a specified name. [HUAWEI]wlan [HUAWEI]undo ap ap-name xx Delete the AP with an ID in a specified list. [HUAWEI]wlan [HUAWEI]undo ap ap-id xx Delete the AP with a specified MAC address. [HUAWEI]wlan [HUAWEI]undo ap ap-mac xx Delete APs in a specified AP group. [HUAWEI]wlan [HUAWEI]undo ap ap-group xx Delete all APs. [HUAWEI]wlan [HUAWEI]undo ap all Add a specified AP to the AP blacklist. [HUAWEI]ap-blacklist mac x-x-x

Can ACs force Portal authentication users to go offline
This function is supported by ACs and Fat APs supporting Portal authentication.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top