Do APs support WPS

2

Huawei APs and ACs do not support WPS.

Other related questions:
Do APs support radio calibration
All Huawei APs support radio calibration. Currently, 80 MHz calibration bandwidth is supported by the AP2030DN, AP3030DN, AP4030DN, AP4030DN-E, AP4130DN, AP5030DN, AP5030DN-S, AP5130DN, AP7030DE, AP9131DN, AP9132DN, AD9430DN-24 (including the mapping RUs), AD9430DN-12(including the mapping RUs), AP9330DN, AP8030DN, and AP8130DN.

Do APs support spectrum analysis
Currently, the AP3010DN-AGN and AP9330DN do not support spectrum analysis. Fat APs do not support spectrum analysis.

Do ACs support Portal authentication
Portal authentication, also called web authentication, is classified into internal and external Portal authentication. Both ACs and Fat APs support Portal authentication.

Do WLAN devices support the Mesh function
Fat APs do not support the Mesh function. From V200R005C10, the AP9130DN (Fat AP) can function as a vehicle-mounted AP in vehicle-ground communication scenarios. Because vehicle-mounted APs communicate with trackside APs through Mesh links, the Mesh function can be configured for Fat APs since V200R005C10. However, Fat APs can be used only as vehicle-mounted APs in vehicle-ground communication scenarios, but cannot be used for bridging. Currently, the Mesh function is supported only in the AC+Fit AP architecture. However, in this architecture, the AP6310SN-GN, AP2010DN, AP2030DN, AP7030DE, AP9330DN, AD9430DN-24 (including connected RUs), and AD9430DN-12 (including connected RUs) do not support the Mesh function. For more information about Mesh configurations, see: V200R005: Mesh Configuration. V200R006: Mesh Configuration.

Do WLAN devices support the WDS function
Fat APs do not support the WDS function. Currently, the WDS function is supported only in the AC+Fit AP architecture. However, in this architecture, the AP6310SN-GN, AP2010DN, AP2030DN, AP7030DE, AP9330DN, AD9430DN-24 (including connected RUs), and AD9430DN-12 (including connected RUs) do not support the WDS function. In WDS networking, Huawei APs cannot be interconnected to non-Huawei devices. For WDS configuration in the AC+Fit AP architecture, see (the R5 version is used as an example): V200R005: WDS Configuration. V200R006: WDS Configuration.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top