Is user detection supported in Portal authentication

8

User detection is supported only in external Portal authentication.

Other related questions:
Is traffic detection supported in Portal authentication
Traffic detection is supported only in external Portal authentication.

How to configure the number of access users supported by Portal authentication on a WLAN device
To configure the number of access users supported by Portal authentication on a WLAN device, perform the following operations: 1. Run the system-view command to enter the system view. 2. Run the authentication-profile name authentication-profile-name command to enter the authentication profile view. 3. Run the authentication max-user max-user-number command to configure the maximum number of authenticated users allowed in a VAP profile. The maximum number of access users can also be configured in a service set or an AP profile. If the parameter is configured in both of them, the smaller value takes effect.

Support for Portal authentication
Portal authentication is also called web authentication. Depending on the network layer where Portal authentication is performed, Portal authentication falls into Layer 2 and Layer 3 authentication. - Layer 2 Portal authentication: No Layer 3 forwarding device is deployed between the authentication client and AR. - Layer 3 Portal authentication: A Layer 3 forwarding device is deployed between the authentication client and AR. The support for Portal authentication is as follows: - In V200R003C00 and later versions, all AR models support Layer 2 and Layer 3 Portal authentication. - In versions earlier than V200R03C00, all AR models support only Layer 2 Portal authentication.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top