How to create a Portal authentication user on a WLAN device

5

To create a Portal authentication user on a WLAN device, run the following commands:

[Huawei] aaa

[Huawei-aaa] local-user admin1234 password cipher Helloworld@6789

[Huawei-aaa] local-user admin1234 service-type web //Set the service type of the Portal authentication user to web.

[Huawei-aaa] quit

Other related questions:
How to configure the number of access users supported by Portal authentication on a WLAN device
To configure the number of access users supported by Portal authentication on a WLAN device, perform the following operations: 1. Run the system-view command to enter the system view. 2. Run the authentication-profile name authentication-profile-name command to enter the authentication profile view. 3. Run the authentication max-user max-user-number command to configure the maximum number of authenticated users allowed in a VAP profile. The maximum number of access users can also be configured in a service set or an AP profile. If the parameter is configured in both of them, the smaller value takes effect.

Creating a VLAN on a WLAN device
The following example describes how to configure a VLAN on a WLAN device: [HUAWEI] vlan batch 2 4 to 10 15 //Create VLANs 2, 4-10, and 15. [HUAWEI] interface vlanif 10 // Enter the view of VLANIF 10. [HUAWEI-Vlanif10]

How to configure 802.1x authentication on a WLAN device for local users
For the procedure of configuring 802.1x authentication for local users, click Example for Configuring 802.1x Authentication (AAA in RADIUS Mode) (through commands) or Example for Configuring 802.1x Authentication for Local Users (through the web page) in AC6605&AC6005&ACU2(AC&FITAP)Product Documentation. The AC V200R006 is used as an example.

Which user access authentication modes are supported by a WLAN device
WLAN devices support MAC authentication, 802.1x authentication, and Portal authentication.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top