When a STA is roaming, whether the STA subnet attributes are changed

6

During STA roaming, STA subnet attributes such as the IP address, VLAN, ACL, and priority are inherited and will not be changed.

Other related questions:
When a STA is roaming, whether reauthentication or re-login is required
No reauthentication or re-login is required when a STA is roaming.

Does a STA need to be reauthenticated or re-logged in during STA roaming? Do the STA's subnet properties (including the IP address, home VLAN, ACL, and priority) change
During STA roaming, the STA does not need to be reauthenticated or re-logged in. In addition, the STA's subnet properties are inherited, so they do not change.

If the STA roaming speed is slow, how can I handle it
The causes and solutions for slow STA roaming speeds are as follows: 1. The roaming sensitivity of STAs is not properly configured on the AC. Adjust the roaming sensitivity of STAs. 2. The network is not properly planned. Optimize the network plan. 3. AP signal interference exists. Scan AP channels to eliminate interference. 4. Users use different security policies. The roaming time of a STA using WEP is smaller than that of a STA using WPA. Select proper security policies based on actual requirements. 5. STAs switch between different channels during roaming. The roaming time of a STA that switches from channel 1 to channel 6 is smaller than that of the STA that switches from channel 11 to channel 6. Slow handover may cause packet loss during roaming. It is normal if only 1 to 2 packets are lost in this process.

How to configure key negotiation between STAs and APs for roaming
Key negotiation between STAs and APs can only be configured in V200R003. The configuration procedure is as follows: [AC-wlan-view] ap-profile name huawei id 1 //Create AP profile huawei. [AC-wlan-ap-prof-huawei] 4-way-handshake ap //Configure key negotiation between a STA and an AP. [AC-wlan-ap-prof-huawei] quit [AC-wlan-view] ap id 1 [AC-wlan-ap-1] profile-id 1 [AC-wlan-ap-1] quit [AC-wlan-view] commit ap 1 //Deliver the configuration to the AP. Warning: Committing configuration may cause service interruption,continue?[Y/N]y

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top