Do Fat APs support load balancing

2

Fat APs do not support load balancing. Load balancing is supported only in AC+Fit AP architecture.

Other related questions:
Principles of AP load balancing
Load balancing can evenly distribute AP traffic loads to ensure high bandwidth for each STA. The load balancing function applies to wireless networks with high user densities to ensure proper access of STAs. Depending on whether a load balancing group needs to be manually created, load balancing is classified into static and dynamic load balancing. For details about the principles, see: V200R005: Configuring Load Balancing V200R006: Configuring Load Balancing

Do ACs support SMS authentication
Yes. ACs and Fat APs support this function.

Do ACs support advertisement page push
Yes. ACs and Fat APs support this function.

Do WLAN devices support the Mesh function
Fat APs do not support the Mesh function. From V200R005C10, the AP9130DN (Fat AP) can function as a vehicle-mounted AP in vehicle-ground communication scenarios. Because vehicle-mounted APs communicate with trackside APs through Mesh links, the Mesh function can be configured for Fat APs since V200R005C10. However, Fat APs can be used only as vehicle-mounted APs in vehicle-ground communication scenarios, but cannot be used for bridging. Currently, the Mesh function is supported only in the AC+Fit AP architecture. However, in this architecture, the AP6310SN-GN, AP2010DN, AP2030DN, AP7030DE, AP9330DN, AD9430DN-24 (including connected RUs), and AD9430DN-12 (including connected RUs) do not support the Mesh function. For more information about Mesh configurations, see: V200R005: Mesh Configuration. V200R006: Mesh Configuration.

Do WLAN devices support the WDS function
Fat APs do not support the WDS function. Currently, the WDS function is supported only in the AC+Fit AP architecture. However, in this architecture, the AP6310SN-GN, AP2010DN, AP2030DN, AP7030DE, AP9330DN, AD9430DN-24 (including connected RUs), and AD9430DN-12 (including connected RUs) do not support the WDS function. In WDS networking, Huawei APs cannot be interconnected to non-Huawei devices. For WDS configuration in the AC+Fit AP architecture, see (the R5 version is used as an example): V200R005: WDS Configuration. V200R006: WDS Configuration.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top