How can I activate a suspended AP when the AP uses the PoE power supply

5

APs provide a self-recovery mechanism. When software or hardware on an AP is suspended, the AP automatically recovers.

Other related questions:
How to activate an AP in PoE power supply mode upon an AP response failure
APs provide a self-healing mechanism. When software or hardware on an AP stops responding, the AP automatically recovers.

Do WLAN devices support PoE power supply
The following WLAN devices support PoE power supply: AC: AC6605 and AC6005-8-PWR AP: AD9430DN-24, AD9430DN-12, and APs with PoE_OUT marked on a port

Whether the AR router used as the AC supports PoE power supply for APs
PoE technology is used on the wired Ethernet and is most widely used on LANs. PoE allows power to be transmitted to terminals through data transmission lines or idle lines.This technology provides power over a 10Base-T, 100Base-TX, or 1000Base-T Ethernet network, spanning a distance of up to 100 m. PoE can be used to effectively provide centralized power for terminals such as IP phones, Access Points (APs), chargers of portable devices, POS machines, cameras, and data collection devices. Whether the AR can supply power to APs depends on whether the AR supports the PoE function, but does not depend on whether the AR functions as an AC. AR series routers that support PoE are as follows: Device models: AR207V-P, AR201VW-P; supported interfaces: Ethernet0/0/0 to Ethernet0/0/7 Device models: AR151W-P; supported interfaces: Ethernet0/0/0 to Ethernet0/0/4 Device models: AR1220V, AR1220W, and AR1220VW; supported interfaces: Ethernet0/0/4 to Ethernet0/0/7 All GE electrical interfaces on the 4ES2GP-S card support the PoE function. However, you need to install the 100W AC PoE power module on the device to enable the PoE function.

What should be noted when using PoE power supplies
In the versions earlier than V100R005, all PoE power supplies are 250 W non-constant current power supplies. When two power supplies are used, they are used for power redundancy, but do not offer power. In V100R005 and later versions, PoE power supplies include 250 W and 500 W constant current power supplies. When two 250 W or 500 W constant current power supplies are used, the power supplies can be used for power redundancy and offer power at the same time. In V200R002 and later versions, PoE power supplies include 250 W, 500 W, 580 W, and 1150 W constant current power supplies. When two 580 W or 1150 W constant current power supplies are used, the power supplies can be used for power redundancy and offer power at the same time.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top