How do I query the AP version

7

V200R005 and earlier versions: Run the display ap-run-info id ap-id command on the AC to view the AP's Software version.

V200R006 and later versions: Run the display ap run-info { ap-name ap-name | ap-id ap-id } command on the AC to view the AP's Software version.

Ensure that the AP is in normal state.

Other related questions:
Querying server version
You can query the server version as follows: ? On the iBMC WebUI, choose Information > System Info > Product Info > Mainboard Info. You can view the BMC, BIOS, and CPLD version information on this page. ? On the iMana WebUI, choose System Information > Firmware Version > Mainboard. You can view the BMC, BIOS, and CPLD version information on this page. ? On the E9000 MM910 Web interface, click the Chassis Information tab, you can view the version and manufacturing information about server components on this page.

Querying the BMC (iMana) version
You can use either of the following methods to query the iBMC or iMana version: Log in to the iBMC or iMana management network port using the CLI, and run the ipmcget -d version command. The value of Active iMana in the command output indicates the version of the BMC. Log in to the BMC WebUI, and choose Configuration > Firmware Upgrade. The versions of the active and backup BMC images are displayed.

How to upgrade the AP version on the CLI
Perform the following operations to upgrade the AP version through the CLI: 1. Log in to an AP through the serial port or Telnet. 2. Run the display version command to check the AP version. 3. Run the save command to save the current configuration file of the AP, and back up the configuration file to a PC. 4. Save the upgrade software package in a server. 5. Run the upgrade version check command to verify the correctness of the upgrade assistant package. //For the AP8x30xN and AP9x30xN, you do not need to perform this operation. 6. Run the upgrade version ftp FatAP6X10XN_V200R005C10.bin 169.254.0.100 admin admin command to upgrade the AP. The system automatically restarts and implements the upgrade. For information on how to upgrade a Fat AP on the CLI, see the upgrade guide in the appropriate version of a Fat AP model. For information on how to upgrade a Fit AP on the CLI, see the upgrade guide in the appropriate version of a Fit AP model.

How to upgrade the AP version on an AC
Only Fit APs support version upgrade on the AC. Perform the following operations to upgrade a single AP on an AC: 1. Obtain the AP software package from Huawei official website, and upload it to the server. // In AC mode, upload the AP software package to an AC; in FTP or SFTP mode, upload the AP software package to an FTP or SFTP server. 2. Run the display ap all command on the AC to view information about the AP to be upgraded. 3. Run the ap-update load ap-id 1 update-filename FitAP6X10XN_V200R005C10.bin command in the WLAN view of the AC to upgrade the AP version. 4. Wait for the system to report the upgrade result. After the AP upgrade is complete, the upgrade result is displayed on the AC. 5. Run the ap-update reset ap-id 1 command in the WLAN view of the AC to reset the AP. For more information, see the upgrade guide in the appropriate version of a Fit AP model.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top