What are service set types on an AC?

9

There are three types of service sets:
- AP management: manages APs. APs determine whether to forward data upstream according to the data forwarding status of a management service set.
- AC management: manages ACs. An AC identifies users according to VLAN information. After the AC determines that a user is in a management service set during authentication, it identifies the user as a management user and allows the user to access the AC using Telnet.
- Service type: manages WLAN services but not APs or ACs.

Other related questions:
Types of ASON services
Question: What are the types of ASON services? Answer: Diamond service: important services that need to be kept for a long time and allow only transient interruptions, such as private lines for banks, securities, and important government sectors. Gold service: services that have strict requirements on real-time processing, latency, and transient service interruption time, such as 2M and 3G voice services, and VIP customer services. Silver service: services with unstable, burst, and heavy traffic, and that do not require real-time processing, such as data private line services, cell Internet access services, and cable TV services. Copper service: temporary services. The impact is small even if such a service is interrupted. Summary and Suggestion: An important feature of ASON is the survival against multiple faults. The survivability requirements are as follows: A diamond service can be rerouted to a new trail for at least once after its working or protection trail becomes faulty. A gold service can undergo at least one protection switching and can be rerouted and restored for at least once. A silver service can be rerouted and restored for at least once. For the first or last node of a service, when a link that carries the maximum service bandwidth becomes faulty for the first time, the impaired service can be restored to another fiber of the node. It is recommended that the services be converged into VC-4 services outside ASON NEs if possible. If tunnel services are required, gold tunnels are preferentially selected. Silver tunnel is the second choice. In this case, you need to create two silver tunnels with separate routes, and configure lower-order SNCP services for dual-feeding and selective receiving of the two silver tunnels.

Entry for setting the client-side service type for the LDGF and TN52TOM boards
You can set the client-side service types for LDGF and TN52TOM boards in WDM Interface in the NE Explorer on the NMS.

Whether a port whose service type is set to STM-64 can receive 10GE WAN services
A port whose service type is set to STM-64 can receive 10GE WAN services. To receive 10GE WAN services, however, you are advised to set the port service type to 10GE WAN.

Three types of SNC services and their differences
Tributary SNCP protection is classified into SNC/I, SNC/N, and SNC/S. The difference of the three types of protection lies in the capability of monitoring OTN SM, PM, and TCM overheads and therefore they have different alarm trigger conditions.

Types of services supported by TOA boards
TOA boards support the following types of services: FE: Ethernet service at a rate of 125 Mbit/s. GE: Ethernet service at a rate of 1.25 Gbit/s, supporting GE optical signals and electrical signals. OTU1: OTN services at the rate of 2.67 Gbit/s. STM-1/OC-3: SDH/SONET service at a rate of 155.52 Mbit/s. STM-4/OC-12: SDH/SONET service at a rate of 622.08 Mbit/s. STM-16/OC-48: SDH/SONET service at a rate of 2.5 Gbit/s. FC100: SAN service at a rate of 1.06 Gbit/s. FC200: SAN service at a rate of 2.12 Gbit/s. FC400: SAN service at a rate of 4.25 Gbit/s. FICON: SAN service at a rate of 1.06 Gbit/s. FICON Express: SAN service at a rate of 2.12 Gbit/s. FICON4G: SAN service at a rate of 4.25 Gbit/s. SDI: digital TV service at a rate of 270 Mbit/s. HD-SDI: high-definition digital TV service at a rate of 1.49 Gbit/s. HD-SDIRBR: high-definition digital TV service at a rate of 1.49/1.001 Gbit/s. 3G-SDI: high definition video services at the rate of 2.97 Gbit/s. 3G-SDIRBR: high-definition digital TV service at a rate of 2.97/1.001 Gbit/s. DVB-ASI: digital TV service at a rate of 270 Mbit/s. ESCON: SAN service at a rate of 200 Mbit/s. FDDI: SAN service at a rate of 125 Mbit/s.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top